Plastic/Rubber

No.148 HDT Test [DTUL / VICAT], Heat Distortion (Deflection Under Load), Heat Distortion Tester

No.148-HD　HEAT DISTORTION TESTER VIDEO -OPERATION & MOTION　VIDEO- No.148-HD HEAT DISTORTION TESTER JIS K7191-1、K7206、ASTM D648、D1525、ISO 75-1、306 This tester is used to evaluate the heat resistance of plastic. By loading specified bending stress to the test specimen while increasing the test temperature...

• 2018-05-09

No.517 DU PONT TYPE FALLING IMPACT TESTER【YASUDA-SEIKI】 For Testing Plastic Sheet and Paint Coat Durability

No.517 DU PONT TYPE FALLING IMPACT TESTER JIS (K5400), K5600-5-3, ASTM D2794, ISO 6272 This tester is used to evaluate the falling weight endurance on coated film and point impact strength for plastic film. Attaching the test specimen between the...

• 2018-05-09

No.274 PUMMEL TESTER【YASUDA-SEIKI】For Measuring the Pummel Value of PVB Film

No.274 PUMMEL TESTER This tester is for evaluating the bondage of PVB film fragments inside safety glass composites used for automobiles. The glass is constantly impacted by hammer while moving in an S shape. The specimen is then evaluated according...

• 2018-05-09

No.220 DART IMPACT TESTER【YASUDA-SEIKI】For Evaluating the Impact Resistance of Plastic Film

No.220 DART IMPACT TESTER JIS K7124-1、Z1702、Z1707、ASTM D1709、ISO 7765-1 This tester is used to evaluate the impact resistance of plastic film and plastic sheet according to the stair case method. The operator is to free fall a dart from the prescribed...

• 2018-05-09

No.183 FALLING BALL IMPACT TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.

No.183 FALLING BALL IMPACT TESTER JIS (K5400)、K5600-5-3、(K6718)、(K6745)、K7211、ISO 6272 This tester is used to evaluate the impact resistance of rigid plastic, coating etc. The operator is to observe the destruction status of the test specimen after it has been hit by...

• 2018-05-09

No.181 Yasuda’s FILM IMPACT TESTER, Used for measuring Puncture Resistance by Pendulum Impact【YASUDA-SEIKI】

No.181 FILM IMPACT TESTER ASTM D3420 This tester is used to evaluate the impact hole punching endurance of plastic film, paper etc. A hemispherical impact ball is attached to the head of the pendulum so that the impact workload to...

• 2018-05-09

No.260 For Measuring Compression Residual Strain of Urethane Foam【YASUDA-SEIKI】 FOAM RUBBER REPEATED COMPRESSION TESTER

No.260 FOAM RUBBER REPEATED COMPRESSION TESTER JIS (K6382)、K6400-4 This tester is used to repeatedly test compression residual strain of polyurethane foam and latex foam soft material according to the constant displacement method. Placing the test specimen between the two parallel...

• 2018-05-09

No.216 Yasuda’s Material Tester, Capable of Testing Strain, Compression, and 3 Point Bending!【YASUDA-SEIKI】

No.216-5kN UNIVERSAL MATERIAL TESTER This universal tensile elongation/ compression tester (Auto Strain/ Strograph) is best suited for plastic and rubber. The tester capacity comes in either a maximum of 5 kN respectively. The test specimen is attached to chucks on...

• 2018-05-09

No.268 ULTRA-LOW TEMP. UNIVERSAL IMPACT TESTER 【YASUDA-SEIKI】 Capable of Producing -70℃ Conditions for Low Temp. Impact Testing

No.268 UNIVERSAL IMPACT TESTER JIS K7110、K7111-1、ASTM D256、ISO 179、180 This pendulum type Charpy impact tester can automatically conduct the test cycle, and is capable of testing at extremely low temperatures (as low as -70°C). Test conditions are inputted via touch screen...

• 2018-05-09

No.119 DE MATTIA FLEX CRACKING AND CRACK GROWTH TESTER 【YASUDA-SEIKI】 For Flex / Crack Growth / Aging of Rubber Materials

No.119 DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER JIS K6260、ASTM D813、BS-903、ISO 132 This tester is used to measure the appearance of cracks and the growth of the cracks to vulcanized rubber and thermo-plastic rubber by adding repetitive bending stress. The...

• 2018-05-09

No.145 CREEP TESTER 【YASUDA-SEIKI】 Creep (Static Strain, Bending, Compression) Measurement

No.145-A/No.145-B CREEP TESTER (PULLEY TYPE/ BALANCE TYPE) JIS K7115、ASTM D2990、ISO 899-1 This tester is used to measure the increasing creep by applying static load to plastic test specimens. By choosing the Chuck, the tester enables to conduct tensile test, condensation...

• 2018-05-09