No.183
FALLING BALL IMPACT TESTER
Overview of FALLING BALL IMPACT TESTER
This tester is used to evaluate the impact resistance of rigid plastic, coating etc.
The operator is to observe the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height.
Reference Standards
JIS (K5400)、K5600-5-3、(K6718)、(K6745)、K7211、ISO 6272
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Falling Height | 50 to Max. 1,000 mm (Pitch 50 mm) 50 to Max. 2,000 mm (Pitch 50 mm) |
| Falling Weight | Depends on the Standards |
| Specimen Holder | Depends on the Standards |
| Accessories | Spirit Level: 1 pc, Foot Switch |
| Power Source | AC 100 V, 1-Phase, 3 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | Tester Body: W650 × D550 × H1,400 to 2,500 mm, 110 kg Control Box: W350 × D300 × H250 mm, 8 kg |
Other products
- Testing resistance against low temperatures and change in properties of o-rings and rubbers | TEMPERATURE RETRACTION TESTER (TR TESTER) / No.145-L
- No.605 PAR MARTON TYPE RUBBER BUFFER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- Evaluating springback (spread rate) of enameled wires | ENAMELED WIRE STIFFNESS TESTER (SPRING BACK METHOD) / No.163
- Evaluating thermal adhesion and heat seal strength of cellophane and films | YSS HEAT SEALER / JIS HEAT SEALER / No.212 / No.213
- Evaluating repeated compression set of polyurethane foam (flexible cellular materials) | FOAM RUBBER REPEATED COMPRESSION TESTER / No.260
- Cutting guide for accurate preparation of paper and film samples for tensile testing | STANDARD SAMPLE CUTTER / No.353
- Laboratory-size two-roll mill for kneading rubber and plastics | TEST MIXING ROLL / No.191
- Applicator for drawing paint and pigment films of uniform thickness | FILM APPLICATOR (DOCTOR BLADE) / No.548-YKG
- Evaluating abrasion resistance of vulcanized and thermoplastic rubbers | DIN ABRASION TESTER / No.151
- Punching device for accurate preparation of paperboard ring crush samples| DOUBLE BLADE SAMPLE CUTTER / No.355
