No.220
DART IMPACT TESTER
Overview of DART IMPACT TESTER
This tester is used to evaluate the impact resistance of plastic film and plastic sheet according to the stair case method.
The operator is to free fall a dart from the prescribed height to determine the weight of the dart that destructs 50 % of the test specimens.
Reference Standards
JIS K7124-1、Z1702、Z1707、ASTM D1709、ISO 7765-1
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Dart | Method A: Hemispherical shape, φ38 ± 1 mm, Mass 40 g Method B: Hemispherical shape, φ50 ± 1 mm, Mass 320 g |
| Dart Mass | Method A: Max. 890 g Method B: Max. 1,410 g |
| Falling Height | Method A: 0.66 ± 0.01 m Method B: 1.50 ± 0.01 m |
| Pneumatic Clamp | Inner Diameter φ125 ± 2 mm |
| Pressure Gauge | Max. 1 MPa (Scale 0.05 MPa) |
| Accessories | Spirit Level: 1 pc, Foot Switch |
| Option | Air Compressor, Low Temperature Oven Spec, Safety Cover |
| Power Source | AC 100 V, 1-Phase, 15 A, 50/60 Hz |
| Air Source | 0.5 MPa or More |
| Dimensions/ Weight (Approx.) | W620 × D400× H2,150 mm, 55 kg |
Other products
- No.258-ZA IMPACT TESTER (FULL AUTOMATIC)
- No.519 Paint Film Drawing Tester【YASUDA SEIKI】For the tester to evaluate the adhesiveness of the coated film according to the Drawing Test Method
- No.140-SAS AUTOMATIC CAPILLARY RHEOMETER 【YASUDA-SEIKI】For Evaluating the Flow Characteristics of Plastic Materials
- No.429 OLSEN TYPE STIFFNESS TESTER (FOR LIGHT LOAD)
- Tester regarding Thickness・Viscosity・Specific Gravity【Yasuda Seiki】Tester for evaluating paint・ ink・colorant
- No.409 Water Penetration Resistance Tester For Textile｜For the tester to conduct a water penetration test
- No.541 Gardner Type Falling Sand Abrasion Tester【Yasuda Seiki】Evaluate the surface endurance of paint and metallic coatings
- No.311 Gurley Type Stiffness Tester｜To evaluate the textile・plastic film according to Gurley Method
- No.274 PUMMEL TESTER【YASUDA-SEIKI】For Measuring the Pummel Value of PVB Film
- No.216 Yasuda’s Material Tester, Capable of Testing Strain, Compression, and 3 Point Bending!
