Plastic/Rubber

Evaluating initial adhesion (tack) of adhesive tapes | BALL TACK TESTER / No.183-BT

No.183-BTBALL TACK TESTER Inquiry Form Overview of BALL TACK TESTER This tester is used to simply evaluate the tackiness of adhesive tape.The operator is to measure the largest ball that stops rolling within the measurement site of the inclination board....

• 2026-06-23

Evaluating impact resistance (falling weight) of rigid resins | FALLING BALL IMPACT TESTER / No.183

No.183FALLING BALL IMPACT TESTER Inquiry Form Overview of FALLING BALL IMPACT TESTER This tester is used to evaluate the impact resistance of rigid plastic, coating etc.The operator is to observe the destruction status of the test specimen after it has...

• 2026-06-23

Measuring puncture and impact resistance of plastic films by pendulum impact | FILM IMPACT TESTER / No.181

No.181 FILM IMPACT TESTER No.181-L FILM IMPACT TESTER (WITH REFRIGERATING MACHINE) No.181FILM IMPACT TESTER Inquiry Form Overview of  FILM IMPACT TESTER This tester is used to evaluate the impact hole punching endurance of plastic film, paper etc.A hemispherical impact ball...

• 2026-06-23

Evaluating slipperiness (coefficient of friction) of films and paper | SLIP TESTER / No.162

No.162 SLIP TESTER No.162-FS SLIP TESTER (HORIZONTAL METHOD) No.162-OY O-Y PULL SLIP TESTER No.162-S5 5 HANGINGS SLIP TESTER No.162SLIP TESTER Inquiry Form Overview of SLIP TESTER This tester is used to measure the friction coefficient of plastic film and paper...

• 2026-06-18

Evaluating mechanical stability of synthetic latex | MARON MECHANICAL STABILITY TESTER / No.156

No.156 MARON MECHANICAL STABILITY TESTER No.156-AUTO MARON MECHANICAL STABILITY TESTER (AUTOMATIC) No.156MARON MECHANICAL STABILITY TESTER Inquiry Form Overview of MARON MECHANICAL STABILITY TESTER This tester is used to evaluate the mechanical stability of synthetic latex and synthetic resin emulsion.By rotating...

• 2026-06-18

Evaluating gel time of thermosetting resins | GEL TIME TESTER (MAGNET TYPE) & GEL TIME TESTER (TORQUE METER TYPE) / No.153

No.153 GEL TIME TESTER (MAGNET TYPE) No.153-GTR GEL TIME TESTER (TORQUE METER TYPE) No.153GEL TIME TESTER (MAGNET TYPE) Inquiry Form Overview of GEL TIME TESTER (MAGNET TYPE) This tester is made to easily measure the gelatinization time of thermoset plastic...

• 2026-06-18

Summary of Special Abrasion Tester 【YASUDA-SEIKI】For the test of Akron Rubber・NBS Rubber・DIN・Williams

No.151 DIN ABRASION TESTER No.151-H DIN ABRASION TESTER (WITH CONSTANT TEMPERATURE CHAMBER) No.152 AKRON RUBBER ABRASION TESTER No.151DIN ABRASION TESTER Inquiry Form Overview of DIN ABRASION TESTER This tester is to evaluate the abrasion resistance of vulcanized rubber and thermoplastic...

• 2026-06-18

Evaluating environmental stress cracking resistance (ESCR) of plastics | STRESS-CRACKING TESTER / No.149

No.149STRESS-CRACKING TESTER Inquiry Form Overview of STRESS-CRACKING TESTER This tester is used to test the constant strain environmental stress cracking of plastic.The testing method is to fix the notched test specimen to the test specimen holding jig and dipping it...

• 2026-06-18

Evaluating heat deflection temperature (HDT) and vicat softening temperature (VST) of plastics | HEAT DISTORTION TESTER / No.148 Series

No.148-HD HEAT DISTORTION TESTER No.148-HDA HEAT DISTORTION TESTER (FULL AUTOMATIC) No.148-HD-500 HIGH TEMPERATURE HEAT DISTORTION TESTER No.148-HDHEAT DISTORTION TESTER Inquiry Form Overview of HEAT DISTORTION TESTER This tester is used to evaluate the heat resistance of plastic.By loading specified bending...

• 2026-06-18

Testing resistance against low temperatures and change in properties of o-rings and rubbers | TEMPERATURE RETRACTION TESTER (TR TESTER) / No.145-L

No.145-LTEMPERATURE RETRACTION TESTER (TR TESTER) Inquiry Form Overview of TEMPERATURE RETRACTION TESTER (TR TESTER) This tester is used to measure the low temperature elastic recovery of vulcanized rubber and thermoplastic rubber.After the test specimen has been elongated under low temperature,...

• 2026-06-18

Testing stiffness of vulcanized and thermoplastic rubbers at low temperatures | GEHMAN STIFFNESS TESTER / No.145-G

No.145-GGEHMAN STIFFNESS TESTER Inquiry Form Overview of GEHMAN STIFFNESS TESTER This tester is used to determine the relative stiffness characteristics of vulcanized or thermoplastic rubber.The tester will record the torsion angle of the test specimen 10 seconds later for which...

• 2026-06-18

Evaluating flow characteristics (melt viscosity) of plastics | AUTOMATIC CAPILLARY RHEOMETER / No.140-SAS

No.140-SASAUTOMATIC CAPILLARY RHEOMETER Inquiry Form Overview of AUTOMATIC CAPILLARY RHEOMETER This tester evaluates the flow feature of molten plastic during the forming process.The molten test sample inside the cylinder that is set at a specific temperature will be extruded from...

• 2026-06-18