Paint

Tester regarding Thickness・Viscosity・Specific Gravity【Yasuda Seiki】Tester for evaluating paint・ ink・colorant

No.536 DENSITY CUP JIS (K5400), K5600-2-4, K6833, ISO 2811 The DENSITY CUP is used to measure the density of liquid paint and adhesion bond according to the density cup method. The operator is to measure the density at a prescript...

• 2018-05-10

No.567 RCI Type Drying Time Recorder【Yasuda Seiki】For the tester to evaluate the drying characteristics of paint

No.567 RCI TYPE DRYING TIME RECORDER This tester is used to evaluate the drying characteristics of paint. Scratching the surface of the paint coated glass board with a steel needle, the operator is to check the orbit and measure the...

• 2018-05-10

No.549 No Pick Up Time Tester【Yasuda Seiki】To evaluate the drying characteristics of pavement marking material

No.549 NO PICK UP TIME TESTER JIS K5665,ASTM D711 This tester is used to evaluate the drying characteristics and tire adhesion of pavement marking material. Rolling the roll on the coating surface for 1 second with only the mass of...

• 2018-05-10

No.524 Print Ink Drying Tester【Yasuda Seiki】For the tester to evaluate the drying characteristics of planographic ink

No.524 PRINT INK DRYING TESTER JIS K5701-1 This tester is used to evaluate the drying characteristics of planographic ink. Wrapping the testing paper to the circumference of the drum which rotates at a constant speed and applying constant load, the...

• 2018-05-10

No.552 GARDNER TYPE WASHABILITY TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.

No.552 GARDNER TYPE WASHABILITY TESTER JIS A6909, K3920, (K5400), K5600-5-11, K5660, K5663, K5667, K5668, ISO 11998 This tester is used to evaluate the washability endurance and moistening abrading endurance of coated film. Brushing the coated film back and forth with...

• 2018-05-10

No.541 Gardner Type Falling Sand Abrasion Tester【Yasuda Seiki】Evaluate the surface endurance of paint and metallic coatings

No.541 GARDNER TYPE FALLING SAND ABRASION TESTER JIS A5423、H8503、H8682-3、ASTM D968 This tester is used to evaluate the abrading endurance of paint and plate coated film surface. Dropping the standard testing sand from a prescript height to the test specimen which...

• 2018-05-10

No.528 Sutherland Type Rub Tester【Yasuda Seiki】To evaluate the abrasion endurance and color transfer characteristic・feathering of paper of planographic ink

No.528 SUTHERLAND TYPE RUB TESTER JIS K5701-1 This tester is used to evaluate the feathering of paper and also abrasion endurance and color transfer characteristic of planographic ink. Attaching the abrading paper and after it has been abraded, the operator...

• 2018-05-10

No.550 Gardner Type Mandrel Bending Tester【YASUDA SEIKI】To evaluate the bending stress of paint・varnish

No.550 GARDNER TYPE MANDREL BENDING TESTER ASTM D522 This tester is used for judging the bending stress of coated specimen. Specification Specifications are subject to change without notice. Test plate 150 × 50 × Less than T 0.3 mm Bending...

• 2018-05-10

No.519 Paint Film Drawing Tester【YASUDA SEIKI】For the tester to evaluate the adhesiveness of the coated film according to the Drawing Test Method

No.519 PAINT FILM DRAWING TESTER JIS K6894  8.6.1 Spiral scoring test This tester is used to evaluate the adhesiveness of fluorine resin coating film on metallic surface according to the drawing test method. The operator is to draw a spiral...

• 2018-05-10

No.516 Erichsen Cupping Tester【YASUDA SEIKI】For the tester to evaluate the Cupping Endurance of the coated film

No.516 ERICHSEN CUPPING TESTER (MANUAL) JIS B7729, (K5400), K5600-5-2, Z2247, ISO 1520, 20482 This tester is used to evaluate the cupping endurance of the coated film. Fixing the test specimen between the holder ring and the dice, the operator is...

• 2018-05-10

No.514 Paint Film Bending Tester【YASUDA SEIKI】For the tester to evaluate the bending endurance of the coated film according to the cylindrical form mandrel method

No.514 PAINT FILM BENDING TESTER JIS (K5400), K5600-5-1, ISO 1519 This tester is used to evaluate the bending endurance of paint and varnish coated film according to the cylindrical form mandrel method. The operator is to place the coated film...

• 2018-05-10

No.551-AUTO Cross Cut Machine is outstanding! 【Yasuda Seiki】Cross Cut Test is can be done precisely

No.551-AUTO CROSS CUT MACHINE Operation & motion video No.551 CROSS CUT MACHINE（AUTOMATIC） JIS D0202、(K5400)、K5600-5-6、ISO 2409 This is a fully automated cross cutting machine, which cuts paint-coated samples in a grid pattern (aka cross cut method). The cutting blade is set...

• 2018-05-10