No.546
AUTOMATIC HOOVER MULLER
Overview of AUTOMATIC HOOVER MULLER
This machine is used to grind and scatter colorant according to the Hoover Muller’s method.
After grinding and scattering the colorant, the operator is to use the GRIND METER to check the grind level of the test specimen.
*The photo includes optional features. For detailed specifications, please contact us.
Reference Standards
JIS K5101
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Glass Plate | φ185 mm, Upper and Lower 1 pc each |
| Plate Rotation Speed | 100 rpm |
| Weight Load | 50 lbf, 100 lbf, 150 lbf [50 lbf = 22.68 kgf] |
| Counter | 6 Digits Preset Counter, 6 Digits Running Counter |
| Power Source | AC 100 V, 1-Phase, 10 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | W500 × D500 × H600 mm, 55 kg |
Other products
- Evaluating plasticity of silicone rubber | WILLIAMS PARALLEL PLATE PLASTOMETER / No.105
- Evaluating flammability (oxygen index) of plastics and rubbers | OXYGEN INDEX FLAMMABILITY TESTER / No.214
- Roller for pressing adhesive tapes (for test preparation) | TAPE ADHESION ROLLER / No.349
- Evaluating hardness of coatings and functional films (pencil scratch method) | PENCIL SCRATCH HARDNESS TESTER / No.553
- Evaluating abrasion resistance of automotive low-voltage cables | LOW-VOLTAGE CABLE ABRASION TESTER FOR AUTOMOBILE / No.208
- Evaluating creep properties (static strain, compression, bending) of plastics and rubbers | CREEP TESTER / No.145
- Evaluating abrasion resistance of vulcanized and thermoplastic rubbers | DIN ABRASION TESTER / No.151
- Evaluating melt flow rate (MFR) of plastics | MELT FLOW INDEX TESTER (FULL AUTOMATIC) / No.120-LABOT
- Evaluating impact resistance (falling weight) of rigid resins | FALLING BALL IMPACT TESTER / No.183
- Evaluating adhesion of fluororesin coatings (drawing test method) | PAINT FILM DRAWING TESTER / No.519
