No.550
GARDNER TYPE MANDREL BENDING TESTER
Overview of GARDNER TYPE MANDREL BENDING TESTER
This tester is used for judging the bending stress of coated specimen.
Reference Standards
ASTM D522
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Test plate | 150 × 50 × Less than T 0.3 mm |
| Bending angle | 180° |
| Mandrel diameter※ | φ1/8″ to φ1″ ⋅⋅⋅ 9 kinds |
| Dimensions/ Weight (Approx.) | W180 × D200 × H195 mm/ 9.5 kg(Including Mandrel) |
*The mandrel diameter will produce special orders other than the above-mentioned.
Other products
- Evaluating stiffness (bending resistance) of paperboards | TABER TYPE STIFFNESS TESTER / No.312
- Evaluating drying time of printing inks | PRINT INK DRYING TESTER / No.524
- Evaluating flexing resistance of optical fiber cables | OPTICAL FIBER FLEXING TESTER / No.257
- Evaluating melt flow rate (MFR) of plastics | MELT FLOW INDEX TESTER (MANUAL) / No.120-FWP
- Evaluating slipperiness (coefficient of friction) of films and paper | SLIP TESTER / No.162
- Evaluating flex cracking and crack growth of vulcanized and thermoplastic rubbers | DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER / No.119
- Small-scale compression molding of plastics and rubbers | BENCHTOP HOT PRESS / No.219
- Evaluating retentivity (shear adhesion) of adhesive tapes and sheets | RETENTIVITY TESTER / No.145-D
- Evaluating strain, compression, and 3-point bending strength of general materials | UNIVERSAL MATERIAL TESTER / No.216
- Measuring softening point of enameled wires (cross over method) | CUT-THROUGH TESTER (FOR ENAMELED WIRE) / No.173-S
