No.524
PRINT INK DRYING TESTER
Overview of PRINT INK DRYING TESTER
This tester is used to evaluate the drying characteristics of planographic ink.
Wrapping the testing paper to the circumference of the drum which rotates at a constant speed and applying constant load, the operator is to measure the offset condition and the drying time of the test specimen.
Reference Standards
JIS K5701-1
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Measuring Time | Max. 15 hr, Max. 1.5 hr |
| Drum Rotation Speed | 1/10 rpm, 1 rpm |
| Rotating Drum | Outer Diameter φ103 ± 1 mm, L300 mm |
| Gear Feed Speed | 0.3 mm/min, 3 mm/min |
| Gear Pressing Load | 7.36 ± 0.20 N (750 ± 20 gf) |
| Accessories | Time Scale |
| Power Source | AC 100 V, 1-Phase, 10 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | W620 × D250 × H310 mm, 25 kg |
Other products
- Summary of Special Abrasion Tester 【YASUDA-SEIKI】For the test of Akron Rubber・NBS Rubber・DIN・Williams
- Evaluating gel time of thermosetting resins | GEL TIME TESTER (MAGNET TYPE) & GEL TIME TESTER (TORQUE METER TYPE) / No.153
- Evaluating stiffness of woven fabrics (cantilever method) | CANTILEVER FABRIC STIFFNESS TESTER / No.476
- Cutting guide for accurate preparation of paper and film samples for tensile testing | STANDARD SAMPLE CUTTER / No.353
- Testing stiffness of vulcanized and thermoplastic rubbers at low temperatures | GEHMAN STIFFNESS TESTER / No.145-G
- Applicator for drawing paint and pigment films of uniform thickness | FILM APPLICATOR (DOCTOR BLADE) / No.548-YKG
- Evaluating mechanical stability of synthetic latex | MARON MECHANICAL STABILITY TESTER / No.156
- Evaluating compression set (fatigue properties) of rubber | COMPRESSION SET TESTER / No.171
- Evaluating grain cracking and bursting strength of leather | GRAIN CRACKING TESTER / No.236
- Evaluating springback (spread rate) of enameled wires | ENAMELED WIRE STIFFNESS TESTER (SPRING BACK METHOD) / No.163
