No.541 GARDNER TYPE FALLING SAND ABRASION TESTER
JIS A5423、H8503、H8682-3、ASTM D968
- This tester is used to evaluate the abrading endurance of paint and plate coated film surface.
- Dropping the standard testing sand from a prescript height to the test specimen which is attached at a 45°angle, the operator is to measure the amount of sand and time it took for the surface of the coated film to be exposed.
Specification
| Specifications are subject to change without notice. | |
| Funnel | Opening φ8″, Opening Angle 60° |
| Guide Pipe | Inner Diameter φ0.75″ |
| Specimen Setting Angle | 45° |
| Standard Sand | Carborundum, Grit #24 |
| Falling Height | 37″ (940 mm) |
| Falling Speed | 21 to 23.5 sec/ 2ℓ |
| Accessories | Specimen Setting Gauge, Jug, Lighting Device |
| Option | Architectual Material Spec (Hoppa Rotating Device, Specimen Retaining Device) |
| Power Source | AC 100 V, 1-Phase, 1 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | W360 × D320 × H1,650 mm, 35 kg |
Contact Us
For over 70 years, Yasuda Seiki’s testing machines have supported quality control and research & development across various industries, meeting the diverse needs of our clients.
Other products
- 258 Series｜Charpy and Izod Impact Testers
- No.149 STRESS-CRACKING TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.519 Paint Film Drawing Tester【YASUDA SEIKI】For the tester to evaluate the adhesiveness of the coated film according to the Drawing Test Method
- No.145-G GEHMAN STIFFNESS TESTER | For Testing the Low Temperature Stiffness of Thermoplastic Rubber and Vulcanized Rubber
- No.183 FALLING BALL IMPACT TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.445 Elmendorf Type Tearing Resistance Tester For Textile【Yasuda Seiki】For the tester to evaluate tearing resistance according to Pendulum D Method
- No.315 ELMENDORF TYPE TEARING RESISTANCE TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.208 LOW-VOLTAGE CABLE ABRASION TESTER FOR AUTOMOBILE｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.145-L TEMPERATURE RETRACTION TESTER (TR TESTER)【YASUDA SEIKI】For Testing O Ring Low Temperature Resistance / Low Temperature Properties
- No.210 MAGNET WIRE ABRASION TESTER (RECIPROCATING TYPE)｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
