No.210-ISO6722
WIRE ABRASION TESTER
Overview of WIRE ABRASION TESTER
This tester is to evaluate the abrasion resistance of cable according to the blade reciprocating method.
Abrading the cable back and forth with constant load, the operator is to check the number of reciprocates until the conduction occurs.
By turning the test sample, one test sample can be tested 3 to 4 times.
Reference Standards
JASO D625-2, ISO 6722
Specification
This version is compatible with samples with a cross-section under 6 ㎟.
| Specifications are subject to change without notice. | |
|---|---|
| Model | No.210-ISO6722 （JASO、ISO） |
Abrasion Length | 15.5 ± 1 mm (Needle displacement 20 ± 1 mm) |
Abrasion Frequency | 55 ± 5 cycles/min |
Sample Clamp | Clamp distance 71 mm |
Test Load | Initial load 2 N–max. 10 N (standard load 7 ± 0.05 N) |
Needle | Diameter ø0.45 ± 0.01 mm |
Counter | 6 digit preset counter |
Angle of Sample Rotation | 0˚, 90˚, 180˚, 270˚ |
Options | Safety cover |
Power Source | AC 100 V 1-phase 3 A 50/60 Hz |
Dimensions and Weight (Approx.) | W480×D447×H600 mm, 33 kg |
No.210
MAGNET WIRE ABRASION TESTER
Overview of MAGNET WIRE ABRASION TESTER
This tester is to evaluate the abrasion resistance of cable according to the blade reciprocating method.
Abrading the cable back and forth with constant load, the operator is to check the number of reciprocates until the conduction occurs.
By turning the test sample, one test sample can be tested 3 to 4 times.
Reference Standards
JASO D625-2, ISO 6722
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Model | No.210 |
Abrasion Length | 10 mm |
Abrasion Frequency | 60 cycles/min |
Test Load | Initial load 2 N–max. 10 N |
Needle | Diameter ø0.4 mm |
Counter | 6 digit preset counter |
Angle of Sample Rotation | 0˚, 120˚, 240˚ |
Options | Safety cover |
Power Source | AC 100 V 1-phase 3 A 50/60 Hz |
Dimensions and Weight(Approx.) | W480×D447×H600 mm, 33 kg |
