No.208
LOW-VOLTAGE CABLE ABRASION TESTER FOR AUTOMOBILE
Overview of LOW-VOLTAGE CABLE ABRASION TESTER FOR AUTOMOBILE
This tester is to evaluate the abrasion resistance of low voltage cables for automobiles according to the abrading tape method.
Attaching the test specimen so that it touches the abrading tape and then the operator is to abrade the test specimen with the abrading tape at a prescript speed.
The abrasion resistance value that is acquired by this method will be the length that the abrading tape abraded before the electric conductor touches the abrading tape.
Reference Standards
JIS C3406, JASO, ISO 6722
Specification
No.208（JIS）
| Specifications are subject to change without notice. | |
|---|---|
| Model | No.208（JIS） |
| Specimen | L900 mm |
| Weight | Top R114 mm, Initial 450 g, 1,350 g, 1,900 g |
| Electrode | φ7 mm |
| Abrasive Tape | Material A, Grit #180, Conductive Pitch 150 mm, Conduction W10 mm |
| Tape Speed | 1,500 mm/min |
| Specimen Rotating Angle | ― |
| Counter | 6 Digits Preset Counter |
| Accessories | Abrasive Tape: 5 pcs |
| Power Source | AC 100 V, 1-Phase, 5 A, 50/60 Hz |
| Dimension/ Weight (Approx.) | Tester Body: W620 × D400 × H510 mm, 50 kg Control Box: W200 × D420 × H315 mm, 10 kg W620 × D300 × H500 mm, 70 kg(LT) |
No.208-JASO
| Specifications are subject to change without notice. | |
|---|---|
| Model | No.208-JASO |
| Specimen | L1 m |
| Weight | Top R114 mm, Initial 0.63 ± 0.05 N Additional Weight 50 to 1,500 g |
| Electrode | φ6.9 mm |
| Abrasive Tape | Material A, Grit #180, Conductive Pitch 150 mm, Conduction W10 mm |
| Tape Speed | 1,500 ± 75 mm/min |
| Specimen Rotating Angle | 0°, 90°, 180°, 270° |
| Counter | 6 Digits Preset Counter |
| Accessories | Abrasive Tape: 5 pcs |
| Power Source | AC 100 V, 1-Phase, 5 A, 50/60 Hz |
| Dimension/ Weight (Approx.) | Tester Body: W620 × D400 × H510 mm, 50 kg Control Box: W200 × D420 × H315 mm, 10 kg W620 × D300 × H500 mm, 70 kg(LT) |
No.208-ISO6722
| Specifications are subject to change without notice. | |
|---|---|
| Model | No.208-ISO6722 |
| Specimen | L1 m |
| Weight | Top R114 mm, Initial 0.63 ± 0.05 N Additional Weight 50 to 1,500 g |
| Electrode | φ6.9 mm |
| Abrasive Tape | Material A, Grit #180, Conductive Pitch 75 mm, Conduction W10 mm |
| Tape Speed | 1,500 ± 75 mm/min |
| Specimen Rotating Angle | 0°, 90°, 180°, 270° |
| Counter | 6 Digits Preset Counter |
| Accessories | Abrasive Tape: 5 pcs |
| Power Source | AC 100 V, 1-Phase, 5 A, 50/60 Hz |
| Dimension/ Weight (Approx.) | Tester Body: W620 × D400 × H510 mm, 50 kg Control Box: W200 × D420 × H315 mm, 10 kg W620 × D300 × H500 mm, 70 kg(LT) |
Other products
- No.416 Crock Meter｜For the tester to evaluate the color fastness of textile products・leather・plastic
- No.161 SPRING ELONGATION TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.519 Paint Film Drawing Tester【YASUDA SEIKI】For the tester to evaluate the adhesiveness of the coated film according to the Drawing Test Method
- No.156 Maron Mechanical Stability Tester【YASUDA-SEIKI】This tester evaluates the mechanical stability of synthetic latex
- No.216 Yasuda’s Material Tester, Capable of Testing Strain, Compression, and 3 Point Bending!
- No.542-AB Automatic Film Applicator 【Yasuda Seiki】(Tabletop Coater, Automatic Coater)
- No.283 PLASTIC SLIDING ABRASION TESTER【YASUDA-SEIKI】To evaluate the sliding abrasion
- No.212 YSS HEAT SEALER・No.213 JIS HEAT SEALER
- No.210 MAGNET WIRE ABRASION TESTER (RECIPROCATING TYPE)
- No.401 For the tester to evaluate the permeability according to Calcium Chloride Method (A-1 Method) or Water Method
