No.149
STRESS-CRACKING TESTER
Overview of STRESS-CRACKING TESTER
This tester is used to test the constant strain environmental stress cracking of plastic.
The testing method is to fix the notched test specimen to the test specimen holding jig and dipping it into a test tube that is filled with test liquid adjusted at 50°C.
The operator is to observe the time it required for the stress crack to arise.
Reference Standards
JIS K6922-2, Z1703, ASTM D1693, ISO 1872-2
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Specimen | W13 ± 0.8 mm, L38 ± 2.5 mm, T3 mm or 2 mm |
| Notching Jig | Notch Depth 0.5 mm, 0.3 mm, Notch Length 19.1 ± 0.1 mm |
| Bending Jig | 1 set |
| Transfer Jig | 1 set |
| Accessories | Test Tube (Outer φ30 × 200 mm)…5 sets each Cork Cap…5 sets each , Aluminum Foil…5 sets each Specimen Fixing Jig: 5 sets each |
| Dimensions/ Weight (Approx.) | W320 × D50 × H65 mm/ 2.5 kg (Notching Jig) |
Other products
- Evaluating adhesion of fluororesin coatings (drawing test method) | PAINT FILM DRAWING TESTER / No.519
- Evaluating gel time of thermosetting resins | GEL TIME TESTER (MAGNET TYPE) & GEL TIME TESTER (TORQUE METER TYPE) / No.153
- Evaluating creep properties (static strain, compression, bending) of plastics and rubbers | CREEP TESTER / No.145
- Evaluating bursting strength of paper, liner film, corrugated board, and coated fabrics | MULLEN TYPE BURSTING STRENGTH TESTER / No.304, 305
- Evaluating stiffness (bending resistance) of paperboards | TABER TYPE STIFFNESS TESTER / No.312
- Evaluating water absorption of non-absorbent paper | GURLEY TYPE WATER ABSORPTIVENESS TESTER(COBB METHOD) / No.352
- Summary of Special Abrasion Tester 【YASUDA-SEIKI】For the test of Akron Rubber・NBS Rubber・DIN・Williams
- Tester of Yasuda Seiki Seisakusho which has been custom made!【Yasuda Seiki】
- Evaluating stiffness of paper, fabrics, and films | GURLEY TYPE STIFFNESS TESTER / No.311
- Evaluating curl and sizing degree of paper | CURL-SIZE TESTER / No.360
