Product

No.101 TABER TYPE ABRASION TESTER【YASUDA SEIKI】 For Abrasion Resistance Evaluation –We Also Provide TABER Wheels!

No.101－HS　 TABER TYPE ABRASION TESTER（TP)　OPERATION & MOTION　VIDEO No.101-H TABER TYPE ABRASION TESTER JIS A1453、（K5400）、K5600-5-8/9、K5665、K6264-2、K6404-4、K6902、K7204、（L1018）、L1085、L1096、ASTM D1044、TAPPI-T476、JAS、（JASO-M403）、ISO 4649、5470-1、7784-1/2、9352 This tester is used to evaluate the abrading endurance of flat surface materials when they are abraded with an abrading wheel. The operator is...

• 2018-05-09

No.183-BT BALL TACK TESTER【YASUDA-SEIKI】For the tester to simply evaluate the tackiness

No.183-BT BALL TACK TESTER JIS Z0237 This tester is used to simply evaluate the tackiness of adhesive tape. The operator is to measure the largest ball that stops rolling within the measurement site of the inclination board.      ...

• 2018-05-09

No.140-SAS-2002 AUTOMATIC CAPILLARY RHEOMETER 【YASUDA-SEIKI】For Evaluating the Flow Characteristics of Plastic Materials

No.140-SAS AUTOMATIC CAPILLARY RHEOMETER JIS K7199、ASTM D3835、ISO 11443 This tester evaluates the flow feature of molten plastic during the forming process. The molten test specimen inside the cylinder that is set at a specific temperature will be extruded from the...

• 2018-05-09

No.191-TM/WM TEST MIXING ROLL【YASUDA SEIKI】 A Roll Mixer for Plastic and Rubber Materials

No.191-TM/WM TEST MIXING ROLL This machine is designed compactly so that it can be installed in testing labs. The machine takes special care in safety by equipping variety of emergency stop systems. The machine can be assorted with electric heating...

• 2018-05-09

No.153 GEL TIME TESTER | The Best Suited Tester for Gel Time Measurement of Thermoplastic Resin

No.153 GEL TIME TESTER (MAGNET TYPE) This tester is made to easily measure the gelatinization time of thermoset plastic resin. The operator is to put the test specimen into the test tube with a rotating rotor. As the gelatinization progresses...

• 2018-05-09

No.214 Details about Yasuda’s FLAMMABILITY TESTER! For testing Plastic, Rubber, and Textile Materials

No.214 OXYGEN INDEX FLAMMABILITY TESTER JIS K6269, K7201, L1091, ASTM D2863, ISO 4589-2, Japanese Fire Services Act This tester is used to evaluate the oxygen index flammability of plastic and rubber. The operator is to check the lowest oxygen level...

• 2018-05-09

No.145-L TR TESTER (Low Temperature Retraction Tester)【YASUDA SEIKI】For Testing O Ring Low Temperature Resistance / Low Temperature Properties

No.145-L TR TESTER JIS K6261、ASTM D1329、ISO 2921 This tester is used to measure the low temperature elastic recovery of vulcanized rubber and thermoplastic rubber. After the test specimen has been elongated under low temperature, the tester will measure the temperature...

• 2018-05-09

No.145-G GEHMAN STIFFNESS TESTER | For Testing the Low Temperature Stiffness of Thermoplastic Rubber and Vulcanized Rubber

No.145-G GEHMAN STIFFNESS TESTER　OPERATION & MOTION VIDEO No.145-G GEHMAN STIFFNESS TESTER JIS K6261、ISO 1432 This tester is used to determine the relative stiffness characteristics of vulcanized or thermoplastic rubber. The tester will record the torsion angle of the test specimen...

• 2018-05-09

No.121 BRITTLENESS TEMPERATURE TESTER【YASUDA SEIKI】 For Testing Low Temperature Resistance (Low Temperature Brittleness) of Plastic and Rubber Materials

No.121-RA BRITTLENESS TEMPERATURE TESTER (WITH REFRIGERATING MACHINE/ ROTARY HOLDER TYPE) JIS C3005, K6261, K6723, K7216, ASTM D746, D2137, ISO 812, 974 This tester is equipped with a rotary holder to continuously run maximum of 4 tests. The testing condition (test...

• 2018-05-09

No.148 HDT Test [DTUL / VICAT], Heat Distortion (Deflection Under Load), Heat Distortion Tester

No.148-HD　HEAT DISTORTION TESTER MOVIE -OPERATION & MOTION　VIDEO- No.148-HD HEAT DISTORTION TESTER JIS K7191-1、K7206、ASTM D648、D1525、ISO 75-1、306 This tester is used to evaluate the heat resistance of plastic. By loading specified bending stress to the test specimen while increasing the test temperature...

• 2018-05-09

No.517 DU PONT TYPE FALLING IMPACT TESTER【YASUDA-SEIKI】 For Testing Plastic Sheet and Paint Coat Durability

No.517 DU PONT TYPE FALLING IMPACT TESTER JIS (K5400), K5600-5-3, ASTM D2794(Plastic), ISO 6272 This tester is used to evaluate the falling weight endurance on coated film and point impact strength for plastic film. Attaching the test specimen between the...

• 2018-05-09

No.274 PUMMEL TESTER【YASUDA-SEIKI】For Measuring the Pummel Value of PVB Film

No.274 PUMMEL TESTER This tester is for evaluating the bondage of PVB film fragments inside safety glass composites used for automobiles. The glass is constantly impacted by hammer while moving in an S shape. The specimen is then evaluated according...

• 2018-05-09