No.122
TEST TUBE AGING TESTER
Overview of TEST TUBE AGING TESTER
This tester is to evaluate the heat resistance aging characteristics of vulcanized rubber and thermoplastic rubber.
To prevent the influence of cross staining of additives, maximum of 4 test specimens are to be put into the independent test tube and heated at a specified temperature and specified testing time.
The tensile strength, cutting stretch, tension stress, and hardness of the test specimens before and after the heating are to be compared to evaluate the heat resistance aging-characteristics.
Reference Standards
JIS K6257、ASTM D865、ISO 188
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Tube Hangings | 24 Hangings |
| Temperature Range | Max. 300 °C |
| Safety Device | Overheat Detection Device, Circuit Braker |
| Accessories | Test Tube (Outer Diameter φ38 × 300 mm): 30 pcs, Air Tube (Outer Diameter φ9 × 375 mm,φ9 × 405 mm): 48 pcs each Cork: 30 pcs, Specimen Hook: 30 pcs, Bush: 24 pcs, Washer: 150 pcs |
| Power Source | AC 200 V, 1-Phase, 20 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | W700 × D560 × H700 mm, 110 kg |
Other products
- Evaluating tearing strength of woven and coated fabrics | ELMENDORF TYPE TEARING RESISTANCE TESTER FOR TEXTILE / No.445
- Evaluating heat deformation of rubber and plastic-insulated wires | HEAT DEFORMATION TESTER / No.185
- Evaluating flex endurance and crack growth of rubbers | ROSS FLEXING TESTER / No.270
- Evaluating indentation and residual indentation of floorings | MCBURNEY INDENTATION TESTER & RESIDUAL INDENTATION TESTER / No.184-A / No.184-B
- Evaluating heat deflection temperature (HDT) and vicat softening temperature (VST) of plastics | HEAT DISTORTION TESTER / No.148 Series
- Evaluating washability and wet abrasion resistance of coatings | GARDNER TYPE WASHABILITY TESTER / No.552
- Notching and forming machine for plastic test samples | NOTCHING MACHINE (AUTOMATIC) / SAMPLE FORMING MACHINE / No.189
- Punching device for accurate preparation of paperboard ring crush samples| DOUBLE BLADE SAMPLE CUTTER / No.355
- Evaluating impact resistance and toughness of plastics | UNIVERSAL IMPACT TESTER / No.258 Series
- Evaluating springback (spread rate) of enameled wires | ENAMELED WIRE STIFFNESS TESTER (SPRING BACK METHOD) / No.163
