No.553-M PENCIL SCRATCH HARDNESS TESTER (ELECTRIC SYSTEM)

No.553-M
PENCIL SCRATCH HARDNESS TESTER (ELECTRIC)

Inquiry Form

Overview of PENCIL SCRATCH HARDNESS TESTER (ELECTRIC)

Instead of moving the pencil arm manually, this model can move automatically.
We also have a double arm model, allowing for testing with 2 pencils simultaneously.

Reference Standards

JIS (C3003), C3216-4, D0202, (K5400), K5600-5-4, K5651, K6894, K6902, K7317, ASTM D2197, D3363, ISO 15184, IEC-60851-4

Operation Video

Specification

Specifications are subject to change without notice.
ModelNo.553-M

Test Area

M-1: 100×180 mm
M-2: 150×180 mm

Stroke Length

Side-to-side: max. 100 mm, front-to-back: max. 50 mm

Pencil Angle

45˚ (option: for enameled wire 60˚)

Travel Speed

Adjustable motor control (standard speed 0.5–1 mm/s)

Test Load

Max. 1 kgf (loaded by a counterweight and additional weights), load adjustable by 50 gf

Accessories

Mitsubishi uni pencil (6B–9H, total 17 pencils), steel needle (1 pc), pencil sharpener, sandpaper #400, spirit level

Options

Heating table, device for short circuit detection, enameled wire test compatibility, arm height adjustable specification for thick samples, stroke length limit sensor, JIS K7317 test compatibility (diamond tip needle, weights, glass plate)

Power Source

AC 100 V 1-phase 3 A 50/60 Hz

Dimensions and Weight (Approx.)

M-1:W440×D200×H440 mm, 20 kg
M-2:W440×D260×H440 mm, 27 kg

Inquiry Form
No.553-T PENCIL SCRATCH HARDNESS TESTER (MANUAL)

No.553-T
PENCIL SCRATCH HARDNESS TESTER (MANUAL)

Inquiry Form

Overview of PENCIL SCRATCH HARDNESS TESTER (MANUAL)

This tester is used to evaluate the hardness of coated film according to the testing machine method.
Scratching the paint surface with a pencil attached at a 45° angle, the operator is to determine the hardest pencil that does not tear or damage the coated film.
The tester can also be used to evaluate the hardness of decorative sheet and resistance to solvents on enameled wire.
By attaching optional jigs, tests compliant with JIS K7317 (scratch hardness test for specialty films) can also be performed.

Reference Standards

JIS (C3003), C3216-4, D0202, (K5400), K5600-5-4, K5651, K6894, K6902, K7317, ASTM D2197, D3363, ISO 15184, IEC-60851-4

Specification

Specifications are subject to change without notice.
ModelNo.553-T

Test Area

100×180 mm

Stroke Length

Side-to-side: max. 100 mm, front-to-back: max. 50 mm

Pencil Angle

45˚ (option: for enameled wire 60˚)

Travel Speed

Handwheel control, 1.75 mm/rotation

Test Load

Max. 1 kgf (loaded by a counterweight and additional weights), load adjustable by 50 gf

Accessories

Mitsubishi uni pencil (6B–9H, total 17 pencils), steel needle (1 pc), pencil sharpener, sandpaper #400, spirit level

Options

Enameled wire test compatibility, arm height adjustable specification for thick samples, JIS K7317 test compatibility (diamond tip needle, weights, glass plate)

Dimensions and Weight (Approx.)

W510×D170×H300 mm, 10 kg

Inquiry Form
No.553-S PENCIL SCRATCH HARDNESS TESTER (HAND PUSH)

No.553-S
PENCIL SCRATCH HARDNESS TESTER (HAND PUSH)

Inquiry Form

Overview of PENCIL SCRATCH HARDNESS TESTER (HAND PUSH)

This tester is used to evaluate the hardness of the coated film with prescript pencil according to the pencil method.
The tester is designed so that the pencil can scratch the testing surface at an angle of 45° and a test load of 750 g.

Reference Standards

JIS K5600-5-4

Specification

Specifications are subject to change without notice.

Loading Method

Single weight loading

3-weight loading

Pencil Angle

45 ± 1˚

Test Load

750 gf

500 gf, 750 gf, 1,000 gf

Accessories

Mitsubishi uni pencil (6B–9H, total 17 pencils), pencil sharpener, sandpaper #1,000, wooden box, additional weights (for 3-weight loading only)

Dimensions and Weight (Approx.)

W120×D85×H130 mm, 2 kg

Inquiry Form

Other products

Product categories