No.101－HS TABER TYPE ABRASION TESTER（TP) OPERATION & MOTION VIDEO
No.101-H TABER TYPE ABRASION TESTER
- This tester is used to evaluate the abrading endurance of flat surface materials when they are abraded with an abrading wheel.
- The operator is to place the abrading wheel to the rotating test specimen at a prescript load and abrade the test specimen.
- After the test is finished, the operator is to measure the abraded mass, volume, thickness, and the optical difference of the test specimen.
- This tester is widely used in testing plastic, rubber, decorative sheet, leather, paper, and paint surface.
Specification
Main Body
| Specifications are subject to change without notice. | ||
| Model | No.101-H-1 | No.101-H-2 |
|
Turntable |
Diameter 150 mm, sample holding ring (screw type) |
|
|
Rotational Speed |
Adjustable via motor speed controller 60 ± 2 rpm, 70±2 rpm, 72±2 rpm |
|
|
Test Load |
2.45 N (250 gf), 4.9 N (500 gf), 9.8 N (1,000 gf) |
|
| Counter |
6-digit preset counter |
|
|
Vacuum System |
One vacuum cleaner Two vacuum nozzles (inner φ8 mm), with height adjusting mechanism Suction force control knob |
Two vacuum cleaners Two vacuum nozzles (inner φ8 mm), with height adjusting mechanism Suction force control knob |
|
Safety Devices |
Motor overload protection circuit, circuit protector (main power) |
|
| Accessories |
Abrading wheels (1 set), rubber mat (t2 mm), nozzle height gauge (t1.5 mm, 1set) |
Abrading wheels (2 sets), rubber mat (t2 mm), nozzle height gauge (t1.5 mm, 1set) |
|
Options |
Turntable φ130 mm specification, sample outer circumference holding ring (split-clamping collar type)*1 , vacuum sensor (digital display), safety cover with interlock |
|
| Power Source |
AC 100 V, 1-phase, 15 A, 50/60 Hz |
AC 100 V 1-phase 20 A 50/60 Hz *Requires 2 sockets. |
|
Dimensions and Weight (Approx.) |
W370×D350×H450 mm, 25 kg |
W710×D370×H450 mm, 50 kg |
*1 For diameter 130 mm only.
No.101-K WHEEL REFACER (FOR TABER ABRASION WHEELS)
| Specifications are subject to change without notice. | |
|
Refacing Tool |
Diamond tool |
|
Wheel Rotational Speed |
1,300–1,500 rpm (50 Hz) 1,550–1,800 rpm (60 Hz) |
| Power Source | AC 100 V, 1-Phase, 3 A, 50/60 Hz |
|
Dimensions and Weight(Approx.) |
W210×D330×H380 mm, 10 kg |
No.101-HS TABER TYPE ABRASION TESTER (WITH VACUUM FLOW METER)
- This is a tester with Wind Meter attached to No.101-H TABER TYPE ABRASION TESTER.
- It sucks the abraded scrap during the test.
- Not only that, it measures the air flow while sucking so it enables to have more precise test result.
Specification
Main Body
| Specifications are subject to change without notice. | |
| Model | No.101-HS |
|
Display and Operation |
Touchscreen |
|
Dimensions and Weight(Approx.) |
W400×D400×H385 mm, 25 kg |
*Refer to No.101-H for specifications not listed above.
*Only a single turntable model is available for No.101-HS.
Inquiry Form
Contact Us For over 70 years, Yasuda Seiki’s testing machines have supported quality control and research & development across various industries, meeting the diverse needs of our clients.
