No.145-D RETENTIVITY TESTER
- This tester is to evaluate the retentivity of adhesive tape and sheet.
- By attaching one end of the test specimen to the testing plate for 25 mm squares and applying load to the other end of the test specimen which is vertically hung down, the tester will measure the distance it got out of alignment or the time it required to fall off from the testing plate.
No.145-D Specification
| Specifications are subject to change without notice. | |
|
Number of Test Samples |
6, 10 or 21 samples per test (3 types) |
|
Test Sample |
Width 25 mm or 12 ± 0.5 mm, length 150 mm |
|
Plate |
Width 50 mm, length 125 mm, thickness 1.1 mm or above, SUS304 stainless steel plate |
|
Test Load |
Initial load 200 gf – Max.1 kgf (Option: Max.2 kgf) (standard 1,000 g ± 5 g) |
|
Grips |
Hook or vise (width 30 mm) |
|
Grip Distance |
200 mm |
|
Grip Stroke Length |
Max. 45 mm, simultaneous up/down moving device |
|
Temperature |
Max. 150 °C |
| Timer |
For setting the time of preheating, testing, and fall of each sample. |
|
Options |
Displacement measurement, low-temperature chamber, temperature and humidity chamber, chamber light, 90˚ peel test, CSV file output |
| Power Source |
Vary according to the tester specs. |
|
Dimensions and Weight (Approx.) |
Vary according to the tester specs. |
Contact Us
For over 70 years, Yasuda Seiki’s testing machines have supported quality control and research & development across various industries, meeting the diverse needs of our clients.
Other products
- No.429 Olsen Type Stiffness Tester (For Light Load)｜To evaluate the bending reaction strength according to Bending Method
- No.476 CANTILEVER FABRIC STIFFNESS TESTER｜For the tester to evaluate the stiffness of textile according to A Method.
- Tester of Yasuda Seiki Seisakusho which has been custom made!【Yasuda Seiki】
- No.304-TP Mullen High-Pressure Type Bursting Strength Tester【YASUDA SEIKI】To evaluate the bursting strength of paper・paper board・rubber・plastic
- No.162 SLIP TESTER of 【YASUDA-SEIKI】 for the measurement of Friction Coefficient! Tester based on Inclination Angle Method
- No.433 Scott Type Crease-Flex Abrasion Tester｜For the tester to conduct a crease-flex abrasion test on textile・rubber・plastic
- No.306 Curated content of special Flexing Tester【Yasuda Seiki】FPC Flexing Tester
- No.212 YSS HEAT SEALER・No.213 JIS HEAT SEALER【YASUDA-SEIKI】To evaluate the thermal adhesion of plastic film・cellophane tape
- No.268 ULTRA-LOW TEMP. UNIVERSAL IMPACT TESTER 【YASUDA-SEIKI】 Capable of Producing -70℃ Conditions for Low Temp. Impact Testing
- No.161 SPRING ELONGATION TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
