Evaluating thermal adhesion and heat seal strength of cellophane and films | YSS HEAT SEALER / JIS HEAT SEALER / No.212 / No.213

• No.212 YSS HEAT SEALER
• No.213 JIS HEAT SEALER

Overview of YSS HEAT SEALER

This tester is used to evaluate the thermal adhesion of cellophane tape, plastic film etc.
The operator can set the thermal adhesion condition such as temperature, pressure, and time of heat sealing.
The pressure is applied by the air cylinder to provide great operability.

Specification

Specifications are subject to change without notice.
Seal Plate	Min. W5 mm to Max. W20 mm, L300 mm
Temperature Range	Max. 300 °C *The surface flatness will only be ensured at the specified temperature.
Pressing Method	Pneumatic Cylinder, Stroke Max. 45 mm
Pressure Gauge	Max. 0.5 MPa (Scale 0.01 MPa)
Timer	Max. 99.99 sec
Accessories	Foot Switch
Option	Safety Cover, Jig for Hot Tack, Specimen Retaining, Air Compressor
Power Source	AC 100 V, 1-Phase, 15 A, 50/60 Hz
Air Source	0.5 MPa or More
Dimensions/ Weight (Approx.)	Tester Body: W450 × D385 × H650 mm, 105 kg Control Box: W230 × D450 × H515 mm, 15 kg

---

Overview of JIS HEAT SEALER

This tester is used to heat seal cellophane, plastic film etc. according to the JIS standard.
The tester can provide accurate load by applying real load pressuring system.

Reference Standards

JIS Z1514, (Z1521), Z1707

Specification

Specifications are subject to change without notice.
Seal Plate	20 × 40 mm × 3 line or 20 × 180 × 1 line
Temperature Range	Max. 300 °C *The surface flatness will only be ensured at the specified temperature.
Pressing Method	Weight Loading, Opening 8 mm
Load Pressure	49 to 294 kPa (0.5 to 3.0 kgf/cm2)
Timer	Max. 99.99 sec
Accessories	Foot Switch
Power Source	AC 100 V, 1-Phase, 10 A, 50/60 Hz
Dimensions/ Weight (Approx.)	W750 × D350 × H670 mm, 65 kg