Electrical/Wire

No.173-S CUT-THROUGH TESTER (FOR ENAMELED WIRE)｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.

No.173-S CUT-THROUGH TESTER (FOR ENAMELED WIRE) JIS C3216-6: 2011 This tester is used to measure the softening point of enameled wire according to the cross over method (method A). The operator is to bisect 2 straight test specimens over a...

• 2018-05-10

No.185 PARALLEL PLATE PLASTOMETER（Automatic）｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.

No.185 PARALLEL PLATE PLASTOMETER JIS C3005, C3307, K6723, ASTM D621 This tester is to conduct heat deformation tests to rubber and plastic electric insulated wires. Placing the test specimen between the parallel plates and adding prescript load and heat for...

• 2018-05-10

No.161 SPRING ELONGATION TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.

No.161 SPRING ELONGATION TESTER JIS (C3003), C3216-3, IEC-60851-3   This tester is used to evaluate the softness of enamel wire according to the spring elongation method. One end of the testing coil is to be rolled to the mandrel and...

• 2018-05-10

No.163 ENAMELED WIRE STIFFNESS TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.

No.163-SB ENAMELED WIRE STIFFNESS TESTER (SPRING BACK METHOD) JIS (C3003), C3216-3, IEC-60851-3 Insert one end of the wire sample into the stopper hole on the mandrel and hang a weight on the other end. Wind the sample around the mandrel...

• 2018-05-10

flex-fatigue-testing machine｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.

No.254 PLUG FLEXING TESTER JIS C3662-2, C8306, IEC-60227-2 This tester is used to test the bending endurance of plugs. Hanging prescript weight on one end of the plug and repeatedly bending the other end 60° back and forth for a...

• 2018-05-10

No.215 SCRAPE TESTER(ONE DIRECTION TYPE)｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.

No.215 SCRAPE TESTER JIS (C3003), C3216-3, IEC-60851-3, IEC-60851-3, NEMA-C9.5 This tester is to evaluate the abrasion resistance of enamel wire. Abrading the enamel wire with a piano wire which continuously increases the abrading load while it abrades the enamel wire,...

• 2018-05-10

No.210 MAGNET WIRE ABRASION TESTER (RECIPROCATING TYPE)｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.

No.210-ISO6722 WIRE ABRASION TESTER JASO D625-2, ISO 6722-1 This tester is to evaluate the abrasion resistance of enamel wire according to the blade reciprocating method. Abrading the enamel wire back and forth with constant load, the operator is to check...

• 2018-05-10

No.208 LOW-VOLTAGE CABLE ABRASION TESTER FOR AUTOMOBILE｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.

No.208 LOW-VOLTAGE CABLE ABRASION TESTER FOR AUTOMOBILE JIS C3406, JASO, ISO 6722 This tester is to evaluate the abrasion resistance of low voltage cables for automobiles according to the abrading tape method. Attaching the test specimen so that it touches...

• 2018-05-10

No.162 SLIP TESTER of 【YASUDA-SEIKI】 for the measurement of Friction Coefficient! Tester based on Inclination Angle Method

No.162-EW SLIP TESTER (FOR ENAMELED WIRE) This tester is used to measure the Inclination Angle(Static Friction Coefficient) when the test specimen of enabled wire starts sliding. Fix 2 specimens parallel to one another onto the Sled and Inclination Board. Put...

• 2018-05-10

Enamel wire testing machine｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.

No.199 BREAKDOWN VOLTAGE TESTER JIS C2110, (C3003), C3216-5, IEC-60851-5 This tester is for evaluating the dielectric strength (volt endurance/ volt destruction) of solid electric insulating material. By exchanging the electrodes, the tester can also be used for board, sheet, textile,...

• 2018-05-10