Measuring inclination angle (static friction coefficient) and slipperiness of enameled wires | SLIP TESTER (FOR ENAMELED WIRE) / No.162-EW

Overview of SLIP TESTER (FOR ENAMELED WIRE)

This tester is used to measure the Inclination Angle(Static Friction Coefficient) when the test specimen of enabled wire starts sliding.
Fix 2 specimens parallel to one another onto the Sled and Inclination Board.
Put the tension to 2 specimens on the board. Set the Sled on the Board, making each specimen get crossed when the Angle is 0°.
Measure the Angle when the Mass starts sliding while the Board gets inclining at a certain speed. Static Friction Coefficient will be calculation as tanθ from the measured Angle.

Reference Standards

JIS C 3216-3 (Annex B)

Specification

Specifications are subject to change without notice.
Model	No.162-EW	No.162-EWD
Sled	Width 120 mm, length 120 mm, mass 500 g
Angle of Incline	0–90˚ (scale graduation 0.2˚)	0–90˚ (scale graduation 0.2˚) *touchscreen display 0.01°
Rate of Incline	1°/s
Options	Adjustable rate of incline
Power Source	AC 100 V 1-phase 3 A  50/60 Hz	AC 100 V 1-phase 5 A  50/60 Hz
Dimensions and  Weight (Approx.)	W750×D270×H425 mm, 30 kg	W750×D270×H425 mm, 30 kg