No.215
SCRAPE TESTER
Overview of SCRAPE TESTER
This tester is to evaluate the abrasion resistance of enamel wire.
Abrading the enamel wire with a piano wire which continuously increases the abrading load while it abrades the enamel wire, the operator is to check the load at which the conduction occurs.
By turning the test specimen, one test specimen can be tested 3 times.
Reference Standards
JIS (C3003), C3216-3, IEC-60851-3
Specification
| Specifications are subject to change without notice. | |
|---|---|
Abrasion Length | 100 mm |
Abrasion Speed | 400 ± 40 mm/min |
Test Load | Initial load 100 gf–max. 3.2 kgf |
Piano Wire | Diameter ø0.23 ± 0.01 mm |
Angle of Sample Rotation | 0˚, 120˚, 240˚ |
Options | Safety cover |
Power Source | AC 100 V 1-phase 5 A 50/60 Hz |
Dimensions and Weight (Approx.) | W560×D470×H490 mm, 45 kg |
