No.216-5kN UNIVERSAL MATERIAL TESTER
- This universal tensile elongation/ compression tester (Auto Strain/ Strograph) is best suited for plastic and rubber.
- The tester capacity comes in either a maximum of 5 kN respectively.
- The test specimen is attached to chucks on both ends and is applied elongation/ compression force continuously through loadcell until breakage.
- Tester control and tensile strength calculation are both conducted via touch panel interface.
Specification
| Specifications are subject to change without notice. | |
| Model | No.216-5kN UNIVERSAL MATERIAL TESTER |
| Test Load | Max. 5 kN |
| Stroke | 1,000 mm* |
| Test Speed | 1 to 1,000 mm/min |
| Accessories | Chuck shapes are to be consulted. |
| Options | CSV Export Software, Extensometer (Stroke: 50 to 500 mm, Accuracy: ± 0.5 mm) |
| Power Source | AC 100 V, 1-Phase, 10 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | W550 × D700 × H1,630 mm, 125 kg |
* The Chucks/ Loadcell length is not included.
No.216-10kN UNIVERSAL MATERIAL TESTER
- This universal tensile elongation/ compression tester (Auto Strain/ Strograph) is best suited for plastic and rubber.
- The tester capacity comes in either a maximum of 10 kN respectively.
- The test specimen is attached to chucks on both ends and is applied elongation/ compression force continuously through loadcell until breakage.
- Tester control and tensile strength calculation are both conducted via touch panel interface.
Specification
| Specifications are subject to change without notice. | |
| Model | No.216-10kN UNIVERSAL MATERIAL TESTER |
| Test Load | Max. 10 kN |
| Stroke | 1,000 mm* |
| Test Speed | 1 to 500 mm/min |
| Accessories | Chuck shapes are to be consulted. |
| Options | CSV Export Software, Extensometer (Stroke: 50 to 500 mm, Accuracy: ± 0.5 mm) |
| Power Source | AC 100 V, 1-Phase, 10 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | W860 × D750 × H1,610 mm, 172 kg |
* The Chucks/ Loadcell length is not included.
Inquiry Form
Contact Us For over 70 years, Yasuda Seiki’s testing machines have supported quality control and research & development across various industries, meeting the diverse needs of our clients.
Other products
- No.527/547 Grind Meter【YASUDA SEIKI】To judge the grind level of planographic ink and the variance level of paint, varnish, and colorant
- Material Cutting Machine｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.476 CANTILEVER FABRIC STIFFNESS TESTER｜For the tester to evaluate the stiffness of textile according to A Method.
- No.402 Spray Tester【YASUDA SEIKI】For the tester to conduct a water repellency test (spray test) on textile・rubber・plastic
- No.189 NOTCHING MACHINE 【YASUDA SEIKI】 For Notching Charpy / Izod Impact Test Specimen
- No.307 MIT Type Folding Endurance Teste【YASUDA SEIKI】For the tester to evaluate the folding endurance of paper board, plastic film, and flexible print circuit board
- No.153 GEL TIME TESTER | The Best Suited Tester for Gel Time Measurement of Thermoplastic Resin
- No.433 Scott Type Crease-Flex Abrasion Tester｜For the tester to conduct a crease-flex abrasion test on textile・rubber・plastic
- No.210 MAGNET WIRE ABRASION TESTER (RECIPROCATING TYPE)｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.524 Print Ink Drying Tester【Yasuda Seiki】For the tester to evaluate the drying characteristics of planographic ink
