No.402
SPRAY TESTER
Overview of SPRAY TESTER
This tester is to conduct a water repellency test on textile products, rubber, and plastic.
The operator is to spray water from a spray nose that is attached 150 mm high from the test specimen which is attached at a 45° angle.
The operator is to evaluate the water repellency by comparing the moisten test specimen with the comparison model.
Reference Standards
JIS K6404-3, (K6404-8), L1092, ISO 4920
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Specimen | 200 × 200 mm |
| Specimen Holder | φ150 mm, Inclination Angle 45° |
| Glass Funnel (SUS) | Opening φ150 mm |
| Spray Nozzle | Mounting Height 150 mm, Spot φ0.9 mm: 19 pcs |
| Water | 250 ml |
| Spray Time | 20 to 30 sec |
| Accessories | Jug |
| Dimensions/ Weight (Approx.) | W250 × D260 × H580 mm, 5 kg |
Other products
- Evaluating fluidity of pigments and printing inks (spreadometer method) | SPREAD METER / No.506
- Evaluating wet expansibility and contraction of paper | FENCHEL EXPANSION AND CONTRACTION TESTER / No.309
- Measuring submerged-heat shrinkage temperature of leather | LEATHER CONTRACTION TEMPERATURE TESTER / No.202
- Evaluating heat deflection temperature (HDT) and vicat softening temperature (VST) of plastics | HEAT DISTORTION TESTER / No.148 Series
- Evaluating thermal stability, heat aging, and thermal resistance of plastics and rubbers | GEER AGING OVEN / No.102 / No.103
- Laboratory-size two-roll mill for kneading rubber and plastics | TEST MIXING ROLL / No.191
- Evaluating drying time of printing inks | PRINT INK DRYING TESTER / No.524
- Evaluating sliding abrasion characteristics of plastics | PLASTIC SLIDING ABRASION TESTER / No.283
- Evaluating the flammability of automotive interior materials | MVSS Flammability Tester / No.440-S
- Measuring softening point of enameled wires (cross over method) | CUT-THROUGH TESTER (FOR ENAMELED WIRE) / No.173-S
