No.536 DENSITY CUP
- The DENSITY CUP is used to measure the density of liquid paint and adhesion bond according to the density cup method.
- The operator is to measure the density at a prescript temperature and present the density in g/ml form.
Specification
| Specifications are subject to change without notice. | |
| Capacity | 100 ml, 50 ml |
| Dimensions | Outer Diameter φ45 × 90 mm (100 ml) *10 ml Capacity can also be specially manufactured. |
No.506 SPREAD METER
- This tester is used to evaluate the flow ability of colorant and ink according to the spread meter method.
- The operator is to measure the radius of the test specimen’s spread, 60 seconds after when the upper plate which is placed on the parallel plate falls on to the test specimen.
Specification
| Specifications are subject to change without notice. | |
|
Load Plate |
Mass 115 ± 1 g (material: glass or acrylic) |
|
Scale on the Fixed Plate |
Diameter ø12–ø100 mm (pitch radius 1 mm) |
|
Sample Hole |
Inside diameter ø10 ± 0.03 mm,depth 6.37 ± 0.02 mm (capacity 0.5 ml) |
|
Fall Height |
20 ± 1 mm |
|
Options |
Circulating water bath |
|
Dimensions and Weight (Approx.) |
W160×D110×H180 mm, 4 kg |
No.506-PCM AUTOMATIC SPREAD METER
- This tester is the automated version of the SPRED METER.
- By attaching a camera to see and how the test specimen spreads, the test data can also be saved and data processed by a PC with a dedicated software.
Specification
| Specifications are subject to change without notice. | |
|
Spread Time |
10, 30, 60, 100, 150, 210, 300 s |
|
Output Data |
Diameter of spread after 60 s (D), slope (S), intercept (IC), and yield value (YV) |
|
PC Software |
Available for Windows |
|
Options |
Weight loading feature |
|
Power Source |
AC 100 V 1-phase 5 A 50/60 Hz |
|
Dimensions and Weight (Approx.) |
W315×D350×H700 mm, tester 20 kg, power supply box: 5 kg |
No.505 FLOW CUP
-
-
- The FLOW CUP is used to evaluate the flowability and viscosity of paint according to the cup method.
- The cup is to be selected so that the flow time of the paint through the orifice becomes 30 to 100 seconds.
-
Specification
| Specifications are subject to change without notice. | |
| Orifice Diameter |
Select from ø3 mm, ø4 mm, ø5 mm, ø6 mm |
|
Test Sample |
150 ml |
|
Accessories |
Cup stand, glass plate |
|
Options |
Standard oil for calibration |
|
Dimensions and Weight (Approx.) |
W180×D235×H345 mm, 2 kg (includes cup stand) |
*JIS-K5400 compatible Ford cup is also available.
No.507 WET FILM THICKNESS GAUGE
- The WET FILM THICKNESS GAUGE is to measure the ink’s wet film thickness.
- The gauge is made by 3 rings. The center ring is smaller than the outer 2 rings and is eccentric so that when it is rolled on a wet paint, the operator can read the scale when the center ring touches the painted surface.
Specification
| Specifications are subject to change without notice. | |
|
Scale |
0–25 µm, 0–50 µm, 0–100 µm, 0–200 µm |
|
Dimensions (Approx.) |
Diameter ø60×27 mm |
|
Weight (Approx.) |
0.3 kg |
No.558 VOLUME DENSITY METER
- This density meter measures the apparent density(g/ml) and apparent specific volume(ml/g) of pigment powder.
- It consists of a sieve, a funnel, and a density cup.
Specification
| Specifications are subject to change without notice. | |
| Density Cup Capacity | 30 ml |
| Sieve Aperture | 0.5 mm |
| Accessories | Brush, Spatula, Glass Beaker, Density Cup |
| Dimensions/ Weight (Approx.) | W225 × D200 × H270 mm, 1.3 kg |
Contact Us
For over 70 years, Yasuda Seiki’s testing machines have supported quality control and research & development across various industries, meeting the diverse needs of our clients.
