No.318
WATER VAPOR PERMEABILITY CUP
Overview of WATER VAPOR PERMEABILITY CUP
This tester is used to evaluate the permeability of plastic film and moisture-proof packaging material for processed paper and coating according to the cup method.
The permeability obtained by this method will be the mass of vapour that went through the unit area of membranal material during a specific amount of time and prescript temperature and humidity conditions.
Reference Standards
JIS (K5400), K6549, Z0208, TAPPI-T448, T464, ISO 2528
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Specimen | φ70 mm |
| Vapour Transmission Area | 28 cm2 (Inner Diameter of Cup φ60 mm) |
| Accessories | Cup, Ring, Glass dish: 10 pcs each Guide, Base, Weight, Cutter: 1 pc each |
| Test Methods | A Method: Temperature 25 ± 0.5 °C, Humidity 90 ± 2 % B Method: Temperature 40 ± 0.5 °C, Humidity 90 ± 2 %, Air Velocity 0.5 to 2.5 m/s |
| Dimensions/ Weight (Approx.) | W450 × D250 × H230 mm, 8 kg (Including Case) |
Other products
- Summary of Special Abrasion Tester 【YASUDA-SEIKI】For the test of Akron Rubber・NBS Rubber・DIN・Williams
- No.120-FWP Melt Flow Index Tester (Manual)
- No.548-YKG Doctor Blade (Film Applicator)【YASUDA SEIKI】 To make a coating surface of ink, colorant, and paint 【Constant Thickness! More than one side can be used!!】
- No.401 For the tester to evaluate the permeability according to Calcium Chloride Method (A-1 Method) or Water Method
- No.102 / 103 GEER AGING OVEN【YASUDA SEIKI】 For Evaluating Heat Aging Properties of Materials
- No.283 PLASTIC SLIDING ABRASION TESTER【YASUDA-SEIKI】To evaluate the sliding abrasion
- Evaluating Creep Properties (Static Strain, Compression, Bending) of Plastics and Rubbers | CREEP TESTER / No.145
- Tester regarding Thickness・Viscosity・Specific Gravity【Yasuda Seiki】Tester for evaluating paint・ ink・colorant
- No.153 GEL TIME TESTER | The Best Suited Tester for Gel Time Measurement of Thermoplastic Resin
- No.208 LOW-VOLTAGE CABLE ABRASION TESTER FOR AUTOMOBILE
