No.210-ISO6722 WIRE ABRASION TESTER
- This tester is to evaluate the abrasion resistance of cable according to the blade reciprocating method.
- Abrading the cable back and forth with constant load, the operator is to check the number of reciprocates until the conduction occurs.
- By turning the test sample, one test sample can be tested 3 to 4 times.
This version is compatible with samples with a cross-section under 6 ㎟.
Specification
| Specifications are subject to change without notice. | |
| Model | No.210-ISO6722 （JASO、ISO） |
|
Abrasion Length |
15.5 ± 1 mm (Needle displacement 20 ± 1 mm) |
|
Abrasion Frequency |
55 ± 5 cycles/min |
|
Sample Clamp |
Clamp distance 71 mm |
|
Test Load |
Initial load 2 N–max. 10 N (standard load 7 ± 0.05 N) |
|
Needle |
Diameter ø0.45 ± 0.01 mm |
|
Counter |
6 digit preset counter |
|
Angle of Sample Rotation |
0˚, 90˚, 180˚, 270˚ |
|
Options |
Safety cover |
|
Power Source |
AC 100 V 1-phase 3 A 50/60 Hz |
|
Dimensions and Weight (Approx.) |
W480×D447×H600 mm, 33 kg |
No.210 MAGNET WIRE ABRASION TESTER
JASO D625-2, ISO 6722
- This tester is to evaluate the abrasion resistance of cable according to the blade reciprocating method.
- Abrading the cable back and forth with constant load, the operator is to check the number of reciprocates until the conduction occurs.
- By turning the test sample, one test sample can be tested 3 to 4 times.
Specification
| Specifications are subject to change without notice. | |
| Model | No.210 |
|
Abrasion Length |
10 mm |
|
Abrasion Frequency |
60 cycles/min |
|
Test Load |
Initial load 2 N–max. 10 N |
|
Needle |
Diameter ø0.4 mm |
|
Counter |
6 digit preset counter |
|
Angle of Sample Rotation |
0˚, 120˚, 240˚ |
|
Options |
Safety cover |
|
Power Source |
AC 100 V 1-phase 3 A 50/60 Hz |
|
Dimensions and Weight (Approx.) |
W480×D447×H600 mm, 33 kg |
Inquiry Form
Contact Us For over 70 years, Yasuda Seiki’s testing machines have supported quality control and research & development across various industries, meeting the diverse needs of our clients.
Other products
- No.212 YSS HEAT SEALER・No.213 JIS HEAT SEALER【YASUDA-SEIKI】To evaluate the thermal adhesion of plastic film・cellophane tape
- No.524 Print Ink Drying Tester【Yasuda Seiki】For the tester to evaluate the drying characteristics of planographic ink
- No.401 For the tester to evaluate the permeability according to Calcium Chloride Method (A-1 Method) or Water Method
- flex-fatigue-testing machine｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.197 FLEXOMETER/BALLY FLEX TESTER【YASUDA SEIKI】For the tester to evaluate the bending strength on thin leather.
- No.445 Elmendorf Type Tearing Resistance Tester For Textile【Yasuda Seiki】For the tester to evaluate tearing resistance according to Pendulum D Method
- No.185 PARALLEL PLATE PLASTOMETER（Automatic）｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- Use No.219 BENCHTOP HOT PRESS for compressing plastic・rubber【YASUDA-SEIKI】Compact and ideal for laboratory use
- No.355 DOUBLE BLADE SAMPLE CUTTER FOR RING CRUSH TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.307 MIT Type Folding Endurance Teste【YASUDA SEIKI】For the tester to evaluate the folding endurance of paper board, plastic film, and flexible print circuit board
