No.162-EW SLIP TESTER (FOR ENAMELED WIRE)
JIS C 3216-3 (Annex B)
- This tester is used to measure the Inclination Angle(Static Friction Coefficient) when the test specimen of enabled wire starts sliding.
- Fix 2 specimens parallel to one another onto the Sled and Inclination Board.
- Put the tension to 2 specimens on the board. Set the Sled on the Board, making each specimen get crossed when the Angle is 0°.
- Measure the Angle when the Mass starts sliding while the Board gets inclining at a certain speed. Static Friction Coefficient will be calculation as tanθ from the measured Angle.
No.162-EW Specification
| Specifications are subject to change without notice. | ||
|---|---|---|
| Model | No.162-EW | No.162-EWD |
| Sled | Width 120 mm, length 120 mm, mass 500 g | |
| Angle of Incline | 0–90˚ (scale graduation 0.2˚) | 0–90˚ (scale graduation 0.2˚) *touchscreen display 0.01° |
| Rate of Incline | 1°/s | |
| Options | Adjustable rate of incline | |
| Power Source | AC 100 V 1-phase 3 A 50/60 Hz | AC 100 V 1-phase 5 A 50/60 Hz |
| Dimensions and Weight (Approx.) | W750×D270×H425 mm, 30 kg | W750×D270×H425 mm, 30 kg |
Contact Us
For over 70 years, Yasuda Seiki’s testing machines have supported quality control and research & development across various industries, meeting the diverse needs of our clients.
