No.304-TP UNIVERSAL MULLEN TYPE BURSTING STRENGTH TESTER(TP TYPE)
- This tester is used to evaluate the bursting strength of paper, paper board, liner film, cardboard, rubber, and plastic film.
- The operator is to tighten the test specimen to the tightening board and pressurize it with a rubber membrane mediator.
- The maximum pressure when the test specimen bursts will be the bursting strength of the test specimen.
- The user is to choose the high pressure type or the low pressure type according to the thickness and the bursting strength of the test specimen.
Specification
| Specifications are subject to change without notice. | |
|
Test Sample |
100×100 mm or above |
|
Clamping Plates |
60˚ V-grooves, opening (upper) ø31.5 ± 0.1mm, opening (lower) ø31.5 ± 0.1 mm |
|
Loading Rate |
170 ± 15 ml/min |
|
Accessories |
Rubber diaphragms (10 pcs), bulge height gauge, clamping tools |
|
Options |
Analog pressure gauge, CSV file output |
|
Analog Pressure Gauge |
Select 2 from 2.0, 4.5, 7.0 MPa |
| Power Source |
AC 100 V 1-phase 10 A 50/60 Hz |
|
Dimensions and Weight (Approx.) |
W560×D580×H570 mm, 104 kg |
No.305-TP UNIVERSAL MULLEN TYPE BURSTING STRENGTH TESTER(TP TYPE)
- This tester is used to evaluate the bursting strength of paper, paper board, liner film, cardboard, rubber, and plastic film.
- The operator is to tighten the test specimen to the tightening board and pressurize it with a rubber membrane mediator.
- The maximum pressure when the test specimen bursts will be the bursting strength of the test specimen.
- The user is to choose the high pressure type or the low pressure type according to the thickness and the bursting strength of the test specimen.
Specification
| Specifications are subject to change without notice. | |
|
Test Sample |
60×60 mm or above, thickness 0.64 mm or below |
|
Clamping Plates |
60˚ V-grooves,opening (upper) ø30.5 ± 0.1 mm, opening (lower) ø33.1 ± 0.1 mm |
|
Loading Rate |
95 ± 5 ml/min |
|
Accessories |
Rubber diaphragms (10 pcs), bulge height gauge, clamping tools |
|
Options |
Analog pressure gauge, CSV file output |
|
Analog Pressure Gauge |
Select 2 from 0.3, 0.6, 1.4 MPa |
|
Power Source |
AC 100 V 1-phase 10 A 50/60 Hz |
|
Dimensions and Weight (Approx.) |
W560×D580×H570 mm, 104 kg |
Inquiry Form
Contact Us For over 70 years, Yasuda Seiki’s testing machines have supported quality control and research & development across various industries, meeting the diverse needs of our clients.
Other products
- No.527/547 Grind Meter【YASUDA SEIKI】To judge the grind level of planographic ink and the variance level of paint, varnish, and colorant
- No.260 For Measuring Compression Residual Strain of Urethane Foam【YASUDA-SEIKI】 FOAM RUBBER REPEATED COMPRESSION TESTER
- No.162 SLIP TESTER of 【YASUDA-SEIKI】 for the measurement of Friction Coefficient! Tester based on Inclination Angle Method
- This is a page for Stiffness Tester of Yasuda Seiki Seisakusho related on the textile products!
- No.102 / 103 GEER AGING OVEN【YASUDA SEIKI】 For Evaluating Heat Aging Properties of Materials
- No.183 FALLING BALL IMPACT TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.145-L TEMPERATURE RETRACTION TESTER (TR TESTER)【YASUDA SEIKI】For Testing O Ring Low Temperature Resistance / Low Temperature Properties
- No.258-ZA IMPACT TESTER (FULL AUTOMATIC)
- No.402 Spray Tester【YASUDA SEIKI】For the tester to conduct a water repellency test (spray test) on textile・rubber・plastic
- No.226 For the tester to evaluate the stiffness according to Handle-O-Meter Method｜Handle-O-Meter of Yasuda Seiki Seisakusho
