Plastic/Rubber

No.258-ZA IMPACT TESTER (FULL AUTOMATIC)

Overview & Features Specification Options Fully Automated Impact Testing Up to 210 Consecutive Tests Simply set the samples and input the test conditions into the dedicated software to conduct up to 210 consecutive tests. Automation reduces human error, relieves operators,...

• 2025-01-24

No.258-UTL IMPACT TESTER (WITH ULTRA LOW TEMP. REFRIGERATING MACHINE)

Overview & Features Specification Options Low-Temperature Testing Two Types of Low-Temperature Impact Testers Impact testing can also be performed in low-temperature environments. The No.258-L allows testing between -35℃ to 60℃, while the No.258-UTL supports testing as low as-50℃ to 60℃....

• 2025-01-24

No.258-L IMPACT TESTER (WITH REFRIGERATING MACHINE)

Overview & Features Specification Options Low-Temperature Testing Two Types of Low-Temperature Impact Testers Impact testing can also be performed in low-temperature environments. The No.258-L allows testing between -35℃ to 60℃, while the No.258-UTL supports testing as low as-50℃ to 60℃....

• 2025-01-24

No.258-D IMPACT TESTER (DIGITAL/TOUCHSCREEN) / No.258-PC IMPACT TESTER (DIGITAL/PC)

Overview & Features Specification Options Operation Video Simplest and Easily Operated Smooth Testing Experience The lift-up angle of the hammer after impact is automatically measured, and the impact energy is calculated. Operation methods can be selected from touchscreen control (Model...

• 2025-01-24

258 Series｜Charpy and Izod Impact Testers

Overview Comparison Series Overview Impact testers evaluate impact resistance and toughness by applying an impact force to a sample. The impact energy, measured when a hammer strikes the sample, determines the material’s impact strength.The testing methods include the Charpy Impact...

• 2025-01-16

No.120-FWP Melt Flow Index Tester (Manual)

Overview & Features Specification Options Operation Video Rotary Encoder Standard Equipped Supports both Procedure A and Procedure B Testing in Standard Configuration The rotary encoder is standard-equipped, allowing Procedure A and Procedure B testing in the standard configuration. Additionally, during...

• 2024-12-10

No.120-SAS Melt Flow Index Tester (Automatic)

Overview & Features Specification Options Operation Video Automatic Melt Flow Testing for One Cycle Reduces human error Simply set the sample-filled sample cup onto the carousel, set up the test conditions, and the restactual melt flow testing will be done...

• 2024-12-10

No.120-LABOT Melt Flow Index Tester (Full Automatic)

Overview & Features Specification Options Operation Video Full Automated Melt Flow Testing Capable of up to 12 sequential tests in a row* Simply set the sample-filled sample cup onto the carousel, set up the test conditions, and the actual testing...

• 2024-12-09

120 Series｜Melt-Flow Rate (MFR, MFI, MVR, Flow Properties) Testers

Overview Comparison Series Overview The most common method for evaluating the fluidity of thermoplastic resin is measuring the melt mass-flow rate (MFR) or melt volume-flow rate (MVR).The 120 Series is a melt flow testing machine (Melt Indexer, Melt Flow Indexer,...

• 2024-12-09

No.128-3S SAMPLE DIMENSIONING DEVICE (AUTOMATIC) for Impact Testing

No.128-3S SAMPLE DIMENSIONING DEVICE (AUTOMATIC) This device automatically measures the cross-sectional dimensions of impact test samples. Simply place the sample and press the measurement button on the touchscreen to continuously and automatically measure the remaining width and thickness of the...

• 2024-12-05

No.605 PAR MARTON TYPE RUBBER BUFFER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.

No.605 PAR MARTON TYPE RUBBER BUFFER This tester is used to adjust the thickness of vulcanized rubber for test preparation. The thickness of the rubber sample attached to the table is adjusted by moving sample table towards the abrasion wheel....

• 2020-12-02

No.120 Melt-Flow Rate (MFR, MFI, MVR, Flow Properties) Testers 【YASUDA-SEIKI】 MELT FLOW INDEX TESTER

Table of ContentsNo.120-FWP MELT FLOW INDEX TESTER (MANUAL)No.120-SAS MELT FLOW INDEX TESTER (AUTOMATIC)No.120-LABOT MELT FLOW INDEX TESTER (FULL AUTOMATIC)No.120 Gauze | Number of Basic Sales LotInquiry Form No.120-FWP MELT FLOW INDEX TESTER (MANUAL) JIS K6719-1/2、K6921-2、K6922-2、K6923-1、K6924-1、K6926-2、K7210、ASTM D1238、ISO 1133 *The image includes...

• 2020-12-02