No.476 CANTILEVER FABRIC STIFFNESS TESTER
JIS (L1018), L1096, (JASO)
- This tester is used to evaluate the stiffness of textile according to the 45° cantilever method.
- Placing one end of the test specimen on the top of the slide and sliding the test specimen towards the slide, the operator is to read the position where the other end of the test specimen touches the 45° slide.
Specification
| Specifications are subject to change without notice. | |
| Type | No.476 |
|
Test Sample |
20×150 mm |
|
Scale |
0–150 mm (graduation 1 mm) |
|
Angle of Incline |
45° |
|
Accessories |
Sample weight |
|
Dimensions and Weight (Approx.) |
W225×D125×H100 mm, 2.5 kg |
No.476-M CANTILEVER FABRIC STIFFNESS TESTER (ELECTRIC)
JIS (L1018)、L1096、(JASO)
- This tester is used to evaluate the stiffness of textile according to the 45° cantilever method.
- Placing one end of the test specimen on the top of the slide and sliding the test specimen towards the slide, the operator is to read the position where the other end of the test specimen touches the 45° slide.
Specification
| Specifications are subject to change without notice. | |
| Type | No.476-M |
|
Test Sample |
30×200 mm |
|
Scale |
0–200 mm (graduation 1 mm) |
|
Angle of Incline |
41.5˚, 45˚ (replace the inclined block to change angle) |
|
Test Speed |
60–300 mm/min |
|
Accessories |
Inclined block (41.5˚, 45˚), sample weight,open-end wrench |
| Power Source |
AC 100 V 1-phase 3 A 50/60 Hz |
|
Dimensions and Weight (Approx.) |
W500×D250×H270 mm, 16 kg |
Inquiry Form
Contact Us For over 70 years, Yasuda Seiki’s testing machines have supported quality control and research & development across various industries, meeting the diverse needs of our clients.
