Table of Contents
No.120-FWP MELT FLOW INDEX TESTER (MANUAL)
JIS K6719-1/2、K6921-2、K6922-2、K6923-1、K6924-1、K6926-2、K7210、ASTM D1238、ISO 1133
- This tester is for measuring the melt flow index of thermo-plastic.
- The test can be conducted easily, from setting the test condition up to data analysis, using a 5.7” full color touch panel.
No.120-FWP Specification
| Specifications are subject to change without notice. | |
| Hangings | 1 Hanging |
| Die | φ2.095 ± 0.005 mm, L8.000 ± 0.025 mm |
| Piston | Head Diameter φ9.474 ± 0.007 mm, Head Length L6.35 ± 0.10 mm |
| Cylinder | Inner φ9.550 ± 0.007 mm, L160 mm |
| Temperature Range | Max. 400 °C |
| Initial Weight | 0.325 kgf |
| Additional Weight | 1.20 〜 21.60（※ Please refer below） |
| Test Method | Method A: Manual (Option: Automatic Cutter) Method B: Automatic |
| Data Processing | Method A: Automatic (Measuring the weight of the cut off specimen is done by hand) Method B: Automatic |
| Method B Measuring | Rotary Encoder |
| Standard Specification | SD Card Slot, LAN Port |
| Option | Mini Printer, Method A Air Pressure Type Automatic Cutter, Manual Type Die Plug, Safety Cover with Interlock Attached, Half Die, Air Pressure Type Automatic Loader (No.120-FWP-W) Additional Weight ( 1.20, 2.16, 3.80, 5.00, 10.00, 21.60 kgf.) |
| Accessories | Cleaning Rod (Die & Cylinder), Injection Rod, Funnel, Die Gauge, Method A Cutting Knife, Spirit Level, Gauze |
| Power Source | AC 100 V, 1-Phase, 15 A, 50/60 Hz or AC 200 V, 1-Phase, 10 A, 50/60 Hz |
| Air Source | 0.5 MPa or More(For Method A Pneumatic Type Weight Loading Device Specification) |
| Dimensions/ Weight(Approx.) | No.120FWP: W660× D450 × H1,020 mm/75 kg No.120FWP-WP-W: W710 × D450 × H1,060 mm/ 120 kg |
No.120-SAS MELT FLOW INDEX TESTER (AUTOMATIC)
JIS K6719-1/2、K6921-2、K6922-2、K6923-1、K6924-1、K6926-2、K7210、ASTM D1238、ISO 1133
- This tester is used to measure the melt flow index of thermo-plastic.
- The melt flow index is acquired from the weight or the volume of the extruded specimen at a specified cylinder temperature and with a specified load of piston through the die.
- The tester is assorted with an automatic cleaning system which enables to perform 1 test cycle without discontinuation (option of 3 test cycles).
About the details of No.120-SAS MELT FLOW INDEX TESTER (AUTOMATIC)>>
No.120-SAS Specification
| Specifications are subject to change without notice. | |
| Hangings | 1 or 3 Hangings (2 kinds) |
| Die | φ2.095 ± 0.005 mm, L8.000 ± 0.025 mm |
| Piston | Head Diameter φ9.474 ± 0.007 mm, Head Length L6.35 ± 0.10 mm |
| Cylinder | Inner φ9.550 ± 0.007 mm, L160 mm |
| Temperature Range | Max. 300 °C (Option: Max. 400 °C) |
| Initial Weight | 0.325 kgf |
| Additional Weight | 1.20 〜 21.60（※ Please refer below） |
| Test Method | Method A: Manual (Option: Automatic) Method B: Automatic |
| Specimen Feeding | Automatic |
| Weight Loading | Automatic |
| Weight Change | Manual (Option: Automatic) |
| Cylinder Cleaning | Automatic (Solvent Cleaning can also be Automatic) |
| Die Cleaning | Automatic |
| Piston Cleaning | Manual (Option: Automatic) |
| Die Cleaning Rod Cleaning | Manual (Option: Automatic) |
| Cleaning Gauze Feeding | Manual |
| Data Processing | Method A: Manual (Option: Automatic) Method B: Automatic |
| Method B Measuring | Rotary Encoder |
| Software | Windows Compatible |
| Accessories | Cleaning Rod (Die, Cylinder), Solvent Cleaning Device, Specimen Cup, Cup Holder, Infundibulum, Die Gauge, Spirit Level, Dust Box, Gauze, Air Gun |
| Option | Hastelloy Spec, Specimen Purging Device, Specimen Drying Device, Air Compressor, Temperature Calibration Device, Exhaust Fan (Standard for No.120-LABOT), Smoke-Detection Sensor (Standard for No.120-LABOT) Additional Weight ( 1.20, 2.16, 3.80, 5.00, 10.00, 21.60 kgf.) |
| Power Source | AC 200 V, 1-Phase, 10 A, 50/60 Hz AC 200 V, 1-Phase, 15 A, 50/60 Hz (ISO 1133-2 Compatable Type) |
| Air Source | 0.5 MPa or More |
| Dimensions/ Weight (Approx.) | 1 Hanging: W675× D645 × H1,370 mm/200 kg 3 Hangings: W675 × D725 × H1,370 mm/ 220 kg |
No.120-LABOT MELT FLOW INDEX TESTER (FULL AUTOMATIC)
JIS K6719-1/2、K6921-2、K6922-2、K6923-1、K6924-1、K6926-2、K7210、ASTM D1238、ISO 1133
- This tester is equipped with robotic mechanism which enables fully automatic melt flow index tests up to a maximum of 50 samples (standard of 12 samples).
- The test conditions and the outputs can be set and observed through the computer software.
Details of No.120 LABOT MELT FLOW INDEX TESTER (FULL AUTOMATIC)≫
See how our Auto Melt Flow works
No.120-LABOT Specification
| Specifications are subject to change without notice. | |
| Hangings | 12, 24, 50 Hangings (3 kinds) |
| Die | φ2.095 ± 0.005 mm, L8.000 ± 0.025 mm |
| Piston | Head Diameter φ9.474 ± 0.007 mm, Head Length L6.35 ± 0.10 mm |
| Cylinder | Inner φ9.550 ± 0.007 mm, L160 mm |
| Temperature Range | Max. 300 °C (Option: 400 °C) |
| Initial Weight | 0.325 kgf |
| Additional Weight |
1.20 〜 21.60（※ Please refer below） |
| Test Method | Method A: Manual (Option: Automatic) Method B: Automatic |
| Specimen Feeding | Automatic |
| Weight Loading | Automatic |
| Weight Change | Manual (Option: Automatic) |
| Cylinder Cleaning | Automatic (Solvent cleaning can also be automatic) |
| Die Cleaning | Automatic |
| Piston Cleaning | Automatic |
| Die Cleaning Rod Cleaning | Automatic |
| Cleaning Gauze Feeding | Automatic |
| Data Processing | Method A: Manual (Option: Automatic) Method B: Automatic |
| Method B Measuring | Rotary Encoder |
| Software | Windows Compatible |
| Accessories | Cleaning Rod (Die & Cylinder), Solvent Cleaning Device, Specimen Cup, Cup Holder, Infundibulum, Die Gauge, Spirit Level, Dust Box, Gauze, Air Gun |
| Option | Hastelloy Spec, Specimen Purging Device, Specimen Drying Device, Air Compressor, Temperature Calibration Device, Exhaust Fan, Smoke-Detection Sensor Additional Weight ( 1.20, 2.16, 3.80, 5.00, 10.00, 21.60 kgf.) |
| Power Source | AC 200 V, 1-Phase, 10 A, 50/60 Hz AC 200 V, 1-Phase, 15 A, 50/60 Hz (ISO 1133-2 Compatable Type) |
| Air Source | 0.5 MPa or More |
| Dimensions/ Weight(Approx.) | 12,24 Hangings:W950 × D680 × H1,720 mm/ 350 kg 50 Hangings:W1,100× D700 × H1,750 mm/ 400 kg |
No.120 Gauze | Number of Basic Sales Lot
| Cylinder Cleaning Gauze | Basic Sales Lot : 1 box |
 ※ Width 75 mm wide × 20 m |
 12 rolls/package × 6 packages/box ＝144 rolls/box |
| Piston Cleaning Gauze | Basic Sales Lot : 1 box |
 ※ Width 100 mm × 9 m |
 30 rolls/package × 5 packages/box ＝150 rolls/box |
Inquiry Form