No.316
RING CRUSH TESTER
Overview of RING CRUSH TESTER
This tester is used to evaluate the compressive strength of ring shaped paper board according to the ring crush method.
By changing the jig (option), the tester enables to conduct adhesive power test of cardboard, flat surface compression test, and vertical compression test.
Reference Standards
JIS P8126, ISO 12192(Option: Z0402, Z0403-1, Z0403-2)
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Specimen | W12.7 ± 0.1 mm, L152.4 to 2.5 mm, T580 µm or Less |
| Specimen Holder | Outer Frame: Inner Diameter φ49.30 ± 0.05 mm, D6.35 ± 0.25 mm Inner Frame: 9 kinds (To be Specified) |
| Load Measuring | Load Cell: Max. 1,999 N |
| Compression Plate | 100 × 100 mm |
| Compression Speed | 12.5 ± 2.5 mm/min |
| Option | Pin Attachment, Vertical Compression Jig |
| Power Source | AC 100 V, 1-Phase, 10 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | Tester Body: W350 × D400 × H540 mm, 60 kg Control Box: W135 × D350 × H250 mm, 10 kg |
Other products
- Evaluating bending resistance of coatings | PAINT FILM BENDING TESTER / No.514
- Evaluating crush resistance of optical fiber cables | OPTICAL FIBER CRUSH TESTER / No.259
- Tester of Yasuda Seiki Seisakusho which has been custom made!【Yasuda Seiki】
- Evaluating viscosity (efflux time) of paints | FLOW CUP / No.505
- Measuring softening point of enameled wires (cross over method) | CUT-THROUGH TESTER (FOR ENAMELED WIRE) / No.173-S
- Measuring wet film thickness of paints | WET FILM THICKNESS GAUGE / No.507
- Evaluating thermal stability, heat aging, and thermal resistance of plastics and rubbers | GEER AGING OVEN / No.102 / No.103
- Evaluating abrasion resistance of painted, plated, and surface-treated coatings | GARDNER TYPE FALLING SAND ABRASION TESTER / No.541
- Evaluating water vapour permeability of moisture-proof packaging, leather, and coatings | WATER VAPOUR PERMEABILITY CUP / No.318
- Evaluating flexing resistance of plastic films and fpcs | FPC FLEXING TESTER / No.306
