Evaluating bursting strength of paper, liner film, corrugated board, and coated fabrics | MULLEN TYPE BURSTING STRENGTH TESTER / No.304, 305

• No.304-TP UNIVERSAL MULLEN TYPE BURSTING STRENGTH TESTER(TP TYPE)
• No.305-TP UNIVERSAL MULLEN TYPE BURSTING STRENGTH TESTER(TP TYPE)

Overview of UNIVERSAL MULLEN TYPE BURSTING STRENGTH TESTER(TP TYPE)

This tester is used to evaluate the bursting strength of paper, paper board, liner film, cardboard, rubber, and plastic film.
The operator is to tighten the test specimen to the tightening board and pressurize it with a rubber membrane mediator.
The maximum pressure when the test specimen bursts will be the bursting strength of the test specimen.
The user is to choose the high pressure type or the low pressure type according to the thickness and the bursting strength of the test specimen.

Reference Standards

JIS K6404-11, P8112, P8131, TAPPI-T403, T807, T810, ISO 2758, 2759

Specification

Specifications are subject to change without notice.
Test Sample	100×100 mm or above
Clamping Plates	60˚ V-grooves, opening (upper) ø31.5 ± 0.1mm, opening (lower) ø31.5 ± 0.1 mm
Loading Rate	170 ± 15 ml/min
Accessories	Rubber diaphragms (10 pcs), bulge height gauge, clamping tools
Options	Analog pressure gauge, CSV file output
Analog Pressure Gauge	Select 2 from 2.0, 4.5, 7.0 MPa
Power Source	AC 100 V 1-phase 10 A 50/60 Hz
Dimensions and Weight (Approx.)	W560×D580×H570 mm, 104 kg

---

Overview of UNIVERSAL MULLEN TYPE BURSTING STRENGTH TESTER(TP TYPE)

This tester is used to evaluate the bursting strength of paper, paper board, liner film, cardboard, rubber, and plastic film.
The operator is to tighten the test specimen to the tightening board and pressurize it with a rubber membrane mediator.
The maximum pressure when the test specimen bursts will be the bursting strength of the test specimen.
The user is to choose the high pressure type or the low pressure type according to the thickness and the bursting strength of the test specimen.

Reference Standards

JIS K6404-11, P8112, P8131, TAPPI-T403, T807, T810, ISO 2758, 2759

Specification

Specifications are subject to change without notice.
Test Sample	60×60 mm or above, thickness 0.64 mm or below
Clamping Plates	60˚ V-grooves,opening (upper) ø30.5 ± 0.1 mm, opening (lower) ø33.1 ± 0.1 mm
Loading Rate	95 ± 5 ml/min
Accessories	Rubber diaphragms (10 pcs), bulge height gauge, clamping tools
Options	Analog pressure gauge, CSV file output
Analog Pressure Gauge	Select 2 from 0.3, 0.6, 1.4 MPa
Power Source	AC 100 V 1-phase 10 A 50/60 Hz
Dimensions and Weight (Approx.)	W560×D580×H570 mm, 104 kg