No.310
KLEMM CAPILLARY RISE TESTER
Overview of KLEMM CAPILLARY RISE TESTER
This tester is used to evaluate the water absorbing capacity of paper and paper board with large water absorbability according to the Klemm method.
Immersing the lower end of the test specimen vertically into water, the operator is to keep the test specimen in the water for 10 minutes and read the height that the water elevated due to capillary effect.
Reference Standards
JIS L1907, P8141
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Hangings | 8 Hangings |
| Specimen | W15 mm, L200 mm or More |
| Scale | 0 to 200 mm (Scale 1 mm) |
| Dimensions/ Weight (Approx.) | W450 × D150 × H410 mm, 6 kg |
Other products
- Tester of Yasuda Seiki Seisakusho which has been custom made!【Yasuda Seiki】
- No.548-YKG Doctor Blade (Film Applicator)【YASUDA SEIKI】 To make a coating surface of ink, colorant, and paint 【Constant Thickness! More than one side can be used!!】
- No.226 For the tester to evaluate the stiffness according to Handle-O-Meter Method
- No.528 Sutherland Type Rub Tester【Yasuda Seiki】To evaluate the abrasion endurance and color transfer characteristic・feathering of paper of planographic ink
- No.510 Baker Type Film Applicator【YASUDA SEIKI】To paint ink・colorant at a constant thickness!
- 258 Series｜Charpy and Izod Impact Testers
- No.306 Curated content of special Flexing Tester【Yasuda Seiki】FPC Flexing Tester
- No.541 Gardner Type Falling Sand Abrasion Tester【Yasuda Seiki】Evaluate the surface endurance of paint and metallic coatings
- Evaluating Heat Resistance and HDT of Plastics | HEAT DISTORTION TESTER / No.148 Series
- Evaluating Creep Properties (Static Strain, Compression, Bending) of Plastics and Rubbers | CREEP TESTER / No.145
