No.507
WET FILM THICKNESS GAUGE
Overview of WET FILM THICKNESS GAUGE
The WET FILM THICKNESS GAUGE is to measure the ink’s wet film thickness.
The gauge is made by 3 rings. The center ring is smaller than the outer 2 rings and is eccentric so that when it is rolled on a wet paint, the operator can read the scale when the center ring touches the painted surface.
Reference Standards
JIS (K5400), K5600-1-7, ISO 2808
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Scale | 0–25 µm, 0–50 µm, 0–100 µm, 0–200 µm |
| Dimensions (Approx.) | Diameter ø60×27 mm |
| Weight (Approx.) | 0.3 kg *Other specifications are also available. |
Other products
- Evaluating water vapour permeability of textiles (method A-1/A-2) | WATER VAPOUR PERMEABILITY CUP (FOR TEXTILE) / No.401
- Evaluating adhesion of PVB film fragments in laminated safety glass | PUMMEL TESTER / No.274
- Evaluation of impact resistance and toughness of plastics meets automation | IMPACT TESTER (FULL AUTOMATIC) / No.258-ZA
- Cutting guide for accurate preparation of paper and film samples for tensile testing | STANDARD SAMPLE CUTTER / No.353
- Evaluating plasticity of silicone rubber | WILLIAMS PARALLEL PLATE PLASTOMETER / No.105
- Evaluating compression set (fatigue properties) of rubber | COMPRESSION SET TESTER / No.171
- Evaluating melt flow rate (MFR) of plastics | Melt Flow Index Tester / No.120 Series
- Evaluating retentivity (shear adhesion) of adhesive tapes and sheets | RETENTIVITY TESTER / No.145-D
- Evaluating gel time of thermosetting resins | GEL TIME TESTER (MAGNET TYPE) & GEL TIME TESTER (TORQUE METER TYPE) / No.153
- Testing resistance against low temperatures and change in properties of o-rings and rubbers | TEMPERATURE RETRACTION TESTER (TR TESTER) / No.145-L
