No.505
FLOW CUP
Overview of FLOW CUP
The FLOW CUP is used to evaluate the flowability and viscosity of paint according to the cup method.
The cup is to be selected so that the flow time of the paint through the orifice becomes 30 to 100 seconds.
Reference Standards
JIS K5600-2-2, ISO 2431, ASTM D5125
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Orifice Diameter | Select from ø3 mm, ø4 mm, ø5 mm, ø6 mm |
Test Sample | 150 ml |
Accessories | Cup stand, glass plate |
Options | Standard oil for calibration |
Dimensions and Weight (Approx.) | W180×D235×H345 mm, 2 kg (includes cup stand) |
*JIS-K5400 compatible Ford cup is also available.
Other products
- Evaluating bending resistance of coatings | PAINT FILM BENDING TESTER / No.514
- Evaluating plasticity of silicone rubber | WILLIAMS PARALLEL PLATE PLASTOMETER / No.105
- Evaluating stiffness (softness) of paper, plastic films, and textiles (handle-o-meter method) | HANDLE-O-METER / No.226
- Evaluating curl and sizing degree of paper | CURL-SIZE TESTER / No.360
- Roller for pressing adhesive tapes (for test preparation) | TAPE ADHESION ROLLER / No.349
- Cutting guide for accurate preparation of paper and film samples for tensile testing | STANDARD SAMPLE CUTTER / No.353
- Evaluating adhesion of coatings (cross-cut method) | CROSS CUT MACHINE (AUTOMATIC) / No.551-AUTO
- Coating machine for applying paint, pigment, and ink films | AUTOMATIC FILM APPLICATOR / No.542
- Evaluating compression set (fatigue properties) of rubber | COMPRESSION SET TESTER / No.171
- Evaluating springback (spread rate) of enameled wires | ENAMELED WIRE STIFFNESS TESTER (SPRING BACK METHOD) / No.163
