No.510
BAKER TYPE FILM APPLICATOR
Overview of BAKER TYPE FILM APPLICATOR
The BAKER TYPE FILM APPLICATOR is used to paint ink and colorant at a constant thickness.
By using the eccentricity and the scales on both sides of the applicator, the operator can paint at a desired thickness.
Reference Standards
JIS K5101, (K5400)
Specification
| Specifications are subject to change without notice. | |
|---|---|
Coating Thickness | 0–10 mil (graduation 1 mil, 1 mil = 25.4 µm), 0–50 mil (graduation 5 mil) |
Film Width | 100 mm |
Material | Stainless steel |
Dimensions and Weight (Approx.) | 100 mm thickness: W164×D45×H30.5 mm, 1 kg |
*Other specifications are also available.
Other products
- Evaluating bending strength and flexing resistance of thin leather | FLEXOMETER/BALLY FLEX TESTER / No.197
- Evaluating flexibility of coatings | GARDNER TYPE MANDREL BENDING TESTER / No.550
- Evaluating initial adhesion (tack) of adhesive tapes | BALL TACK TESTER / No.183-BT
- Apparent density and specific volume tester for pigment powder | No. 558 VOLUME DENSITY METER
- Evaluating flexing resistance of plastic films and fpcs | FPC FLEXING TESTER / No.306
- Measuring softening point of enameled wires (cross over method) | CUT-THROUGH TESTER (FOR ENAMELED WIRE) / No.173-S
- Evaluating crease-flex resistance of woven and coated fabrics | SCOTT TYPE CREASE-FLEX ABRASION TESTER / No.433
- Evaluating curl and sizing degree of paper | CURL-SIZE TESTER / No.360
- Evaluating water vapour permeability of moisture-proof packaging, leather, and coatings | WATER VAPOUR PERMEABILITY CUP / No.318
- Evaluating impact resistance (dart drop test) of plastic sheets | DART IMPACT TESTER / No.220
