No.259
OPTICAL FIBER CRUSH TESTER
Overview ofOPTICAL FIBER CRUSH TESTER
This tester is for conducting optical fiber cable crushing tests among the testing methods of mechanical characteristics for optical fiber cable or cord.
The specimen is placed between steel plates and applied force continuously but not rapidly to avoid impact.
When the test is finished, the specimen is measured the loss and examined after set for 1 min. or more.
Reference Standards
JIS C6821, C6851, C6861, IEC-60794
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Movable Plate | Width 100 × Length 200 mm |
| Crushing Force | 7 N/mm, 14 N/mm |
|
Dimensions and Weight (Approx.) | W700 × 350 × H500 mm, 10 kg |
Other products
- Evaluating bursting strength of paper, liner film, corrugated board, and coated fabrics | MULLEN TYPE BURSTING STRENGTH TESTER / No.304, 305
- Evaluating flexing resistance of optical fiber cables | OPTICAL FIBER FLEXING TESTER / No.257
- Measuring inclination angle (static friction coefficient) and slipperiness of enameled wires | SLIP TESTER (FOR ENAMELED WIRE) / No.162-EW
- Evaluating impact resistance (falling weight) of rigid resins | FALLING BALL IMPACT TESTER / No.183
- Evaluating washability and wet abrasion resistance of coatings | GARDNER TYPE WASHABILITY TESTER / No.552
- Evaluating dielectric strength (volt endurance) of solid electric insulation materials | BREAKDOWN VOLTAGE TESTER / No.199
- Evaluating fluidity of pigments and printing inks (spreadometer method) | SPREAD METER / No.506
- Evaluating low temperature resistance of vinyl leather | VINYL LEATHER CLOTH COLD PROOF TESTER / No.201
- Apparent density and specific volume tester for pigment powder | No. 558 VOLUME DENSITY METER
- Evaluating bending performance of plugs and cord outlets | PLUG FLEXING TESTER / No.254
