No.257
OPTICAL FIBER CABLE FLEXING TESTER
Overview of OPTICAL FIBER CABLE FLEXING TESTER
This tester is used for conducting flexing tests on optical fiber cables and cords.
The sample specimen is applied a certain amount of weight and bent 90° in both directions.
The specimen is then evaluated by examining the damage and loss caused by the test.
Reference Standards
JIS C6821, C6851, C6861, IEC-60794
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Hangings | 1 hanging, 3 hangings, 6 hangings (3 kinds) |
| Flexing Angle | Left-Right 45°, 60°, 90° (Standard Value 90°) |
| Flexing Speed | 2 sec./ 1 cycle |
| Flexing Mandrel Diameter | R15 mm |
| Weight | 500 g, 1,000 g |
| Option | Break Detection Function |
| Power Source | AC 100 V, 1-Phase, 10 A, 50/60 Hz |
Dimensions and Weight (Approx.) | Differs by Specifications. |
Other products
- Evaluating cupping resistance of coatings | ERICHSEN CUPPING TESTER / No.516
- Evaluating thermal adhesion and heat seal strength of cellophane and films | YSS HEAT SEALER / JIS HEAT SEALER / No.212 / No.213
- Evaluating retentivity (shear adhesion) of adhesive tapes and sheets | RETENTIVITY TESTER / No.145-D
- Roller for pressing adhesive tapes (for test preparation) | TAPE ADHESION ROLLER / No.349
- Evaluating bending resistance of coatings | PAINT FILM BENDING TESTER / No.514
- Evaluating crease-flex resistance of woven and coated fabrics | SCOTT TYPE CREASE-FLEX ABRASION TESTER / No.433
- Evaluating impact resistance (dart drop test) of plastic sheets | DART IMPACT TESTER / No.220
- Notching and forming machine for plastic test samples | NOTCHING MACHINE (AUTOMATIC) / SAMPLE FORMING MACHINE / No.189
- Summary of Special Abrasion Tester 【YASUDA-SEIKI】For the test of Akron Rubber・NBS Rubber・DIN・Williams
- Measuring submerged-heat shrinkage temperature of leather | LEATHER CONTRACTION TEMPERATURE TESTER / No.202
