No.163-SB ENAMELED WIRE STIFFNESS TESTER (SPRINGBACK METHOD)
JIS (C3003), C3216-3, IEC-60851-3
- Insert one end of the wire sample into the stopper hole on the mandrel and hang a weight on the other end.
- Wind the sample around the mandrel three times at a rotational speed of 5–10 times per minute, mark the sample, and then remove the weight.
- Slowly unwind the sample from the mandrel and read the scale at the position where the mark is located to evaluate its softness.
Specification（Springback Method）
| Specifications are subject to change without notice. | |
|
Sample |
1 m, nominal conductor diameter ø0.25–ø1.6 mm |
|
Mandrel |
Rotational speed 5–10 rpm |
|
Test Load |
57 g, 115 g, 455 g |
|
Dial |
0–120 |
| Dimensions and Weight (Approx.) | W128 × D190 × H184 mm/ 6.1 kg |
No.163-HC ENAMELED WIRE STIFFNESS TESTER (SPRINGBACK ANGLE OF A HELICAL COIL)
JIS C3216-3, IEC-60851-3
- Insert one end of the wire sample into the stopper hole on the mandrel and hang a weight on the other end.
- Wind the wire sample around the mandrel five times at the specified rotational speed, mark the sample, and then remove the weight.
- Slowly unwind the sample from the mandrel and read the scale at the position where the mark stopped to evaluate its softness.
Specification（Springback angle of a helical coil）
| Specifications are subject to change without notice. | |
|
Sample |
1 m, nominal conductor diameter ø0.08–ø1.6 mm |
|
Mandrel |
Rotational speed 1–3 rpm |
|
Test Load |
0.25 N , 0.5 N, 1 N, 2 N, 4 N, 8 N, 12 N, 15 N |
|
Dial |
0–72 |
| Dimensions and Weight (Approx.) |
W128×D190×H184 mm, 4.3 kg |
Inquiry Form
Contact Us For over 70 years, Yasuda Seiki’s testing machines have supported quality control and research & development across various industries, meeting the diverse needs of our clients.
Other products
- No.189 NOTCHING MACHINE 【YASUDA SEIKI】 For Notching Charpy / Izod Impact Test Specimen
- No.318 Water Vapour Permeability Cup【YASUDA SEIKI】For the tester to evaluate the permeability of plastic film・processed paper
- No.197 FLEXOMETER/BALLY FLEX TESTER【YASUDA SEIKI】For the tester to evaluate the bending strength on thin leather.
- No.215 SCRAPE TESTER(ONE DIRECTION TYPE)｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.524 Print Ink Drying Tester【Yasuda Seiki】For the tester to evaluate the drying characteristics of planographic ink
- No.306 Curated content of special Flexing Tester【Yasuda Seiki】FPC Flexing Tester
- No.173-S CUT-THROUGH TESTER (FOR ENAMELED WIRE)｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
- No.510 Baker Type Film Applicator【YASUDA SEIKI】To paint ink・colorant at a constant thickness!
- No.542-AB Automatic Film Applicator 【Yasuda Seiki】(Tabletop Coater, Automatic Coater)
- No.149 STRESS-CRACKING TESTER｜YASUDA SEIKI SEISAKUSHO LTD. providing you the best material testing equipment.
