No.558
VOLUME DENSITY METER
Overview of VOLUME DENSITY METER
This density meter measures the apparent density(g/ml) and apparent specific volume(ml/g) of pigment powder.
It consists of a sieve, a funnel, and a density cup.
Reference Standards
JIS K5101
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Density Cup Capacity | 30 ml |
| Sieve Aperture | 0.5 mm |
| Accessories | Brush, Spatula, Glass Beaker, Density Cup |
| Dimensions/ Weight (Approx.) | W225 × D200 × H270 mm, 1.3 kg |
Other products
- Evaluating melt flow rate (MFR) of plastics | MELT FLOW INDEX TESTER (FULL AUTOMATIC) / No.120-LABOT
- Evaluating abrasion resistance of vulcanized and thermoplastic rubbers | AKRON RUBBER ABRASION TESTER / No.152
- Small-scale compression molding of plastics and rubbers | BENCHTOP HOT PRESS / No.219
- Evaluating slipperiness (coefficient of friction) of films and paper | SLIP TESTER / No.162
- Applicator for drawing paint and pigment films of uniform thickness | FILM APPLICATOR (DOCTOR BLADE) / No.548-YKG
- Evaluating impact resistance and toughness of plastics | IMPACT TESTER (DIGITAL/TOUCHSCREEN) & IMPACT TESTER (DIGITAL/PC) / No.258-D, No.258-PC
- Evaluating melt flow rate (MFR) of plastics | MELT FLOW INDEX TESTER (AUTOMATIC) / No.120-SAS
- Measuring softening point of enameled wires (cross over method) | CUT-THROUGH TESTER (FOR ENAMELED WIRE) / No.173-S
- Evaluating impact resistance (dart drop test) of plastic sheets | DART IMPACT TESTER / No.220
- Instrument for drawing paint and ink films of uniform thickness | BAR COATER / No.579
