No.440-S MVSS FLAMMABILITY TESTER

No.440-S
MVSS FLAMMABILITY TESTER

Inquiry Form

Overview of MVSS FLAMMABILITY TESTER

This tester is used to evaluate the flammability of inner material for cars, tractors, and machines.
Attaching the test specimen to a U-shaped specimen holder and flaming the free end for 15 seconds, the operator is to measure the flaming speed of the test

Reference Standards

FMVSS-302、JIS D1201、(JASO)、ISO 3795、ASTM D5132

Specification

For All Models

Specifications are subject to change without notice.

Heat Resistance Wires

Diameter ø0.25 mm

Accessories

Sample holder set, LPG hose, hose clamp, flame height gauge

Options

Timer (for automatic control of the flame application time), heat resistance wires (spare)

Power Source

AC 100 V 1-phase 5 A 50/60 Hz (timer included)

No.440-S1 (FMVSS, ASTM)

Specifications are subject to change without notice.

Test Standard

FMVSS

ASTM

Test Sample
(Standard Dimensions)

Width 102 mm, length 356 mm, thickness 13 mm or below

Width 100 mm, length 300 mm or above, thickness 13 mm or below

Gas Burner

Inside diameter ø10 mm

Inside diameter ø9.5 ± 0.3 mm

Heat Source

Natural gas

Methane or natural gas
(calorific value 37 ± 1 MJ/m3)

Sample Holder

U-shaped with grooves (at 25 mm intervals) and markings

Accessories

Heat resistance wire, holder support

Dimensions and Weight (Approx.)

W480×D250×H580 mm, 25 kg

No.440-S2 (JIS, ISO, JASO)

Specifications are subject to change without notice.

Test Standard

JIS, ISO

JASO

Test Sample
(Standard Dimensions)

Length 356 mm, thickness 13 mm or below when width is 3–60 mm,
length 138 mm, thickness 13 mm or below when width is 60–100 mm

Width 100 mm, length 356 mm

Gas Burner

Inside diameter ø9.5 ± 0.5 mm

Inside diameter ø10 mm

Heat Source

Natural gas (calorific value 38 MJ/m3）

Sample Holder

U-shaped with grooves (at 25 mm intervals), pins, and tray

Accessories

Tray

Dimensions and Weight (Approx.)

W520×D260×H580 mm, 25 kg

Inquiry Form

Other products

Product categories