No.257
OPTICAL FIBER CABLE FLEXING TESTER
Overview of OPTICAL FIBER CABLE FLEXING TESTER
This tester is used for conducting flexing tests on optical fiber cables and cords.
The sample specimen is applied a certain amount of weight and bent 90° in both directions.
The specimen is then evaluated by examining the damage and loss caused by the test.
Reference Standards
JIS C6821, C6851, C6861, IEC-60794
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Hangings | 1 hanging, 3 hangings, 6 hangings (3 kinds) |
| Flexing Angle | Left-Right 45°, 60°, 90° (Standard Value 90°) |
| Flexing Speed | 2 sec./ 1 cycle |
| Flexing Mandrel Diameter | R15 mm |
| Weight | 500 g, 1,000 g |
| Option | Break Detection Function |
| Power Source | AC 100 V, 1-Phase, 10 A, 50/60 Hz |
Dimensions and Weight (Approx.) | Differs by Specifications. |
Other products
- Instrument for drawing paint and ink films of uniform thickness | BAR COATER / No.579
- Evaluating stiffness of paper, fabrics, and films | GURLEY TYPE STIFFNESS TESTER / No.311
- Roller for pressing adhesive tapes (for test preparation) | TAPE ADHESION ROLLER / No.349
- Evaluating stiffness (bending resistance) of paperboards | TABER TYPE STIFFNESS TESTER / No.312
- Evaluating abrasion resistance of vulcanized and thermoplastic rubbers | DIN ABRASION TESTER / No.151
- Evaluating bursting strength of paper, liner film, corrugated board, and coated fabrics | MULLEN TYPE BURSTING STRENGTH TESTER / No.304, 305
- Cup for measuring specific gravity (density) of paints, inks, and adhesives | DENSITY CUP / No.536
- Evaluating impact resistance and toughness of plastics at ultra-low-temperatures | IMPACT TESTER (WITH ULTRA LOW TEMP. REFRIGERATING MACHINE) / No.258-UTL
- Evaluating exfoliation and peel strength of shoe soles (tiptoe) | TIPTOE EXFOLIATION TESTER / No.240
- Testing resistance against low temperatures and change in properties of o-rings and rubbers | TEMPERATURE RETRACTION TESTER (TR TESTER) / No.145-L
