No.550
GARDNER TYPE MANDREL BENDING TESTER
Overview of GARDNER TYPE MANDREL BENDING TESTER
This tester is used for judging the bending stress of coated specimen.
Reference Standards
ASTM D522
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Test plate | 150 × 50 × Less than T 0.3 mm |
| Bending angle | 180° |
| Mandrel diameter※ | φ1/8″ to φ1″ ⋅⋅⋅ 9 kinds |
| Dimensions/ Weight (Approx.) | W180 × D200 × H195 mm/ 9.5 kg(Including Mandrel) |
*The mandrel diameter will produce special orders other than the above-mentioned.
Other products
- Evaluating stiffness of woven fabrics (cantilever method) | CANTILEVER FABRIC STIFFNESS TESTER / No.476
- Evaluating grain cracking and bursting strength of leather | GRAIN CRACKING TESTER / No.236
- Evaluating impact resistance of coatings and plastic sheets (falling weight / dupont drop test) | DU PONT TYPE FALLING IMPACT TESTER / No.517
- Roller for pressing adhesive tapes (for test preparation) | TAPE ADHESION ROLLER / No.349
- Evaluating flex cracking and crack growth of vulcanized and thermoplastic rubbers | DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER / No.119
- Small-scale compression molding of plastics and rubbers | BENCHTOP HOT PRESS / No.219
- Testing impact resistance or brittleness at low temperatures of plastics and rubbers | BRITTLENESS TEMPERATURE TESTER / No.121
- Evaluating the flammability of automotive interior materials | MVSS Flammability Tester / No.440-S
- Testing stiffness of vulcanized and thermoplastic rubbers at low temperatures | GEHMAN STIFFNESS TESTER / No.145-G
- Evaluating thermal adhesion and heat seal strength of cellophane and films | YSS HEAT SEALER / JIS HEAT SEALER / No.212 / No.213
