No.528
SUTHERLAND TYPE RUB TESTER
Overview of SUTHERLAND TYPE RUB TESTER
This tester is used to evaluate the feathering of paper and also abrasion endurance and color transfer characteristic of planographic ink.
Attaching the abrading paper and after it has been abraded, the operator is to check the abrading surface to evaluate the characteristics of the test specimen.
Reference Standards
JIS K5701-1
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Specimen | 100 × 200 mm |
| Rubbing Paper | 50 × 200 mm |
| Rubbing Head | (25.4 ± 0.2) × (50.8 ± 0.2) mm (2 faces), Rubber T8 mm, Mass 908 ± 10 g |
| Additional Weight | 908 ± 10 g |
| Rubbing Distance | 57 ± 1 mm, Circular Arc R185 mm |
| Rubbing Speed | 43 ± 2 times/min |
| Counter | 6 Digits Preset Counter 6 Digits Running Counter |
| Power Source | AC 100 V, 1-Phase, 10 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | W310 × D720 × H370 mm, 46 kg |
Other products
- Evaluating water vapour permeability of textiles (method A-1/A-2) | WATER VAPOUR PERMEABILITY CUP (FOR TEXTILE) / No.401
- Evaluating thermal adhesion and heat seal strength of cellophane and films | YSS HEAT SEALER / JIS HEAT SEALER / No.212 / No.213
- Evaluating flow characteristics (melt viscosity) of plastics | AUTOMATIC CAPILLARY RHEOMETER / No.140-SAS
- Evaluating stroke-abrasion resistance of cables and wires (blade reciprocating method) | WIRE ABRASION TESTER / No.210-ISO6722
- Evaluating impact resistance of coatings and plastic sheets (falling weight / dupont drop test) | DU PONT TYPE FALLING IMPACT TESTER / No.517
- Tester regarding Thickness・Viscosity・Specific Gravity【Yasuda Seiki】Tester for evaluating paint・ ink・colorant
- Evaluating compression set (fatigue properties) of rubber | COMPRESSION SET TESTER / No.171
- Evaluating wet expansibility and contraction of paper | FENCHEL EXPANSION AND CONTRACTION TESTER / No.309
- Evaluating adhesion of fluororesin coatings (drawing test method) | PAINT FILM DRAWING TESTER / No.519
- Evaluating melt flow rate (MFR) of plastics | MELT FLOW INDEX TESTER (MANUAL) / No.120-FWP
