No.519
PAINT FILM DRAWING TESTER
Overview of PAINT FILM DRAWING TESTER
This tester is used to evaluate the adhesiveness of fluorine resin coating film on metallic surface according to the drawing test method.
The operator is to draw a spiral 25 times on the coating surface with a steel needle that is applied with a prescript load to judge the adhesiveness of the coating film.
Reference Standards
JIS K6894 8.6.1 Spiral scoring test
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Specimen Base | 54 × 120 mm |
| Stroke | Max. 72 mm |
| Drawing | Spiral φ10 mm or φ9 mm, Spacing 2.5 mm |
| Weight Load | Initial 100 g to Max. 2,000 ｇ (Standard 500 gf) |
| Needle | φ3 ± 0.05 mm, L23 ± 1 mm, Top Angle 60 ± 5° |
| Option | Heating Plate Spec, Conduction Device |
| Power Source | AC 100 V, 1-Phase, 1 A, 50/60 Hz |
| Dimensions/ Weight (Approx.) | Tester Body: W365 × D140 × H300 mm, 8 kg Conduction Device: W250 × D360 × H250 mm, 5 kg |
Other products
- No.416 Crock Meter｜For the tester to evaluate the color fastness of textile products・leather・plastic
- No.445 Elmendorf Type Tearing Resistance Tester For Textile【Yasuda Seiki】For the tester to evaluate tearing resistance according to Pendulum D Method
- No.202 Leather Contraction Temperature Tester
- Testing Low Temperature Resistance and Properties of O-Rings and Rubbers | TEMPERATURE RETRACTION TESTER (TR TESTER) / No.145-L
- No.517 DU PONT TYPE FALLING IMPACT TESTER【YASUDA-SEIKI】 For Testing Plastic Sheet and Paint Coat Durability
- No.409 Water Penetration Resistance Tester For Textile｜For the tester to conduct a water penetration test
- No.402 Spray Tester【YASUDA SEIKI】For the tester to conduct a water repellency test (spray test) on textile・rubber・plastic
- Testing Low Temperature Stiffness of Vulcanized and Thermoplastic Rubbers | GEHMAN STIFFNESS TESTER / No.145-G
- No.401 For the tester to evaluate the permeability according to Calcium Chloride Method (A-1 Method) or Water Method
- No.181 FILM IMPACT TESTER
