No.514
PAINT FILM BENDING TESTER
Overview of PAINT FILM BENDING TESTER
This tester is used to evaluate the bending endurance of paint and varnish coated film according to the cylindrical form mandrel method.
The operator is to place the coated film testing board on the outer side and bending at a speed so that it takes 1 to 2 seconds to bend the testing board 180°.
The operator is then to see cracks and peels of the coated film.
Reference Standards
JIS (K5400), K5600-5-1, ISO 1519
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Model | No.514 |
| Test Plate | 150 × 50 × T0.3 mm or Less |
| Bending Angle | 180° |
| Mandrel Diameter | φ2, φ3, φ4, φ5, φ6, φ8 and φ10 mm: 7 kinds |
| Supporting Plate Thickness | 1, 2, 2.5, 3, 3.5 and 4 mm: 6 kinds |
| Dimensions/ Weight (Approx.) | W100 × D150 × H40 mm, 8 kg (Including Case) |
No.514-TYPE1
PAINT FILM BENDING TESTER
Overview of PAINT FILM BENDING TESTER
This tester is used to evaluate the bending endurance of paint and varnish coated film according to the cylindrical form mandrel method.
The operator is to place the coated film testing board on the outer side and bending at a speed so that it takes 1 to 2 seconds to bend the testing board 180°.
The operator is then to see cracks and peels of the coated film.
Reference Standards
JIS (K5400), K5600-5-1, ISO 1519
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Model | No.514-TYPE1 |
| Test Plate | 100 × 50 × T0.3 mm or Less |
| Bending Angle | 180° |
| Mandrel Diameter | φ2, φ3, φ4, φ5, φ6, φ8, φ10, φ12, φ16, φ20, φ25 and φ32 mm: 12 kinds |
| Supporting Plate Thickness | 3.5, 6, 8, 10, 11, 12, 13, 13.5, 14, 14.5 and 15 mm: 11 kinds |
| Dimensions/ Weight (Approx.) | W100 × D150 × H40 mm, 8 kg |
