No.510
BAKER TYPE FILM APPLICATOR
Overview of BAKER TYPE FILM APPLICATOR
The BAKER TYPE FILM APPLICATOR is used to paint ink and colorant at a constant thickness.
By using the eccentricity and the scales on both sides of the applicator, the operator can paint at a desired thickness.
Reference Standards
JIS K5101, (K5400)
Specification
| Specifications are subject to change without notice. | |
|---|---|
Coating Thickness | 0–10 mil (graduation 1 mil, 1 mil = 25.4 µm), 0–50 mil (graduation 5 mil) |
Film Width | 100 mm |
Material | Stainless steel |
Dimensions and Weight (Approx.) | 100 mm thickness: W164×D45×H30.5 mm, 1 kg |
*Other specifications are also available.
Other products
- Evaluating flow characteristics (melt viscosity) of plastics | AUTOMATIC CAPILLARY RHEOMETER / No.140-SAS
- Evaluating springback (softness) of enameled wires | SPRING ELONGATION TESTER / No.161
- Evaluating abrasion resistance of vulcanized and thermoplastic rubbers | AKRON RUBBER ABRASION TESTER / No.152
- Testing resistance against low temperatures and change in properties of o-rings and rubbers | TEMPERATURE RETRACTION TESTER (TR TESTER) / No.145-L
- Evaluating flex cracking and crack growth of vulcanized and thermoplastic rubbers | DE MATTIA FLEX-CRACKING AND CRACK GROWTH TESTER / No.119
- Evaluating impact resistance and toughness of plastics at low temperatures | IMPACT TESTER (WITH REFRIGERATING MACHINE) / No.258-L
- Evaluating heat resistance and aging characteristics of vulcanized and thermoplastic rubbers | TEST TUBE AGING TESTER / No.122
- Instrument for drawing paint and ink films of uniform thickness | BAR COATER / No.579
- Evaluating cupping resistance of coatings | ERICHSEN CUPPING TESTER / No.516
- Evaluating dielectric strength (volt endurance) of solid electric insulation materials | BREAKDOWN VOLTAGE TESTER / No.199
