No.401
WATER VAPOUR PERMEABILITY CUP (FOR TEXTILE)
Overview of WATER VAPOUR PERMEABILITY CUP (FOR TEXTILE)
This tester is used to evaluate the permeability of textile products according to the calcium chloride method or the water method.
The permeability will be measured by the mass of vapour that went through a unit area of membrane under prescript temperature and moisture.
Reference Standards
JIS L1099
Specification
| Specifications are subject to change without notice. | |
|---|---|
| Specimen | φ70 mm |
| Vapour Transmission Area | 28 cm2 (Inner Diameter of Cup φ60 mm) |
| Accessories | Cup: 5 pcs |
| Test Method | Temperature 40 ± 2 °C, Humidity 90 ± 5 % or 50 ± 5 %, Air Velocity 0.8 m/s or Less |
| Dimensions/ Weight (Approx.) | W320 × D200 × H55 mm, 5 kg (Including Case) |
Other products
- Evaluating dielectric strength (volt endurance) of solid electric insulation materials | BREAKDOWN VOLTAGE TESTER / No.199
- Measuring puncture and impact resistance of plastic films by pendulum impact | FILM IMPACT TESTER / No.181
- Evaluating water repellency of textiles and coated fabrics | SPRAY TESTER / No.402
- Testing impact resistance or brittleness at low temperatures of plastics and rubbers | BRITTLENESS TEMPERATURE TESTER / No.121
- Evaluating tearing strength of woven and coated fabrics | ELMENDORF TYPE TEARING RESISTANCE TESTER FOR TEXTILE / No.445
- Evaluating impact resistance and toughness of plastics at low temperatures | IMPACT TESTER (WITH REFRIGERATING MACHINE) / No.258-L
- Evaluating air permeability of paper and fabrics | GURLEY TYPE DENSOMETER / No.323
- Evaluating color fastness to rubbing of textiles, leather, and coated fabrics | CROCK METER / No.416
- Evaluating mechanical stability of synthetic latex | MARON MECHANICAL STABILITY TESTER / No.156
- Evaluating impact resistance and toughness of plastics | IMPACT TESTER (DIGITAL/TOUCHSCREEN) & IMPACT TESTER (DIGITAL/PC) / No.258-D, No.258-PC
