- No.304-TP UNIVERSAL MULLEN TYPE BURSTING STRENGTH TESTER(TP TYPE)
- No.305-TP UNIVERSAL MULLEN TYPE BURSTING STRENGTH TESTER(TP TYPE)
No.304-TP
UNIVERSAL MULLEN TYPE BURSTING STRENGTH TESTER(TP TYPE)
Overview of UNIVERSAL MULLEN TYPE BURSTING STRENGTH TESTER(TP TYPE)
This tester is used to evaluate the bursting strength of paper, paper board, liner film, cardboard, rubber, and plastic film.
The operator is to tighten the test specimen to the tightening board and pressurize it with a rubber membrane mediator.
The maximum pressure when the test specimen bursts will be the bursting strength of the test specimen.
The user is to choose the high pressure type or the low pressure type according to the thickness and the bursting strength of the test specimen.
Reference Standards
JIS K6404-11, P8112, P8131, TAPPI-T403, T807, T810, ISO 2758, 2759
Specification
| Specifications are subject to change without notice. | |
|---|---|
Test Sample | 100×100 mm or above |
Clamping Plates | 60˚ V-grooves, opening (upper) ø31.5 ± 0.1mm, opening (lower) ø31.5 ± 0.1 mm |
Loading Rate | 170 ± 15 ml/min |
Accessories | Rubber diaphragms (10 pcs), bulge height gauge, clamping tools |
Options | Analog pressure gauge, CSV file output |
Analog Pressure Gauge | Select 2 from 2.0, 4.5, 7.0 MPa |
| Power Source | AC 100 V 1-phase 10 A 50/60 Hz |
Dimensions and Weight (Approx.) | W560×D580×H570 mm, 104 kg |
No.305-TP
UNIVERSAL MULLEN TYPE BURSTING STRENGTH TESTER(TP TYPE)
Overview of UNIVERSAL MULLEN TYPE BURSTING STRENGTH TESTER(TP TYPE)
This tester is used to evaluate the bursting strength of paper, paper board, liner film, cardboard, rubber, and plastic film.
The operator is to tighten the test specimen to the tightening board and pressurize it with a rubber membrane mediator.
The maximum pressure when the test specimen bursts will be the bursting strength of the test specimen.
The user is to choose the high pressure type or the low pressure type according to the thickness and the bursting strength of the test specimen.
Reference Standards
JIS K6404-11, P8112, P8131, TAPPI-T403, T807, T810, ISO 2758, 2759
Specification
| Specifications are subject to change without notice. | |
|---|---|
Test Sample | 60×60 mm or above, thickness 0.64 mm or below |
Clamping Plates | 60˚ V-grooves,opening (upper) ø30.5 ± 0.1 mm, opening (lower) ø33.1 ± 0.1 mm |
Loading Rate | 95 ± 5 ml/min |
Accessories | Rubber diaphragms (10 pcs), bulge height gauge, clamping tools |
Options | Analog pressure gauge, CSV file output |
Analog Pressure Gauge | Select 2 from 0.3, 0.6, 1.4 MPa |
Power Source | AC 100 V 1-phase 10 A 50/60 Hz |
Dimensions and Weight (Approx.) | W560×D580×H570 mm, 104 kg |
